Fast photodiodes

The OP910 and OP910W silicon PIN photodiodes respond linearly to light at irradiances from 0.2 to 3 mW/cm2. Typical rise- and falltimes for the devices are 10 ns. The sensors are mounted in hermetic TO-18 packages and offer an operating range from -65°C to 125°C. The OP910 has a glass lens and acceptance angle of 䔰°. The OP910W has a flat glass window and an acceptance angle of 䕌°.

Mar 1st, 1999

Fast photodiodes

The OP910 and OP910W silicon PIN photodiodes respond linearly to light at irradiances from 0.2 to 3 mW/cm2. Typical rise- and falltimes for the devices are 10 ns. The sensors are mounted in hermetic TO-18 packages and offer an operating range from -65°C to 125°C. The OP910 has a glass lens and acceptance angle of 䔰°. The OP910W has a flat glass window and an acceptance angle of 䕌°.

Optek Technology, Carrollton, TX

More in Detectors & Imaging
Femtosecond Applications Benefit from Ytterbium Amplifiers
Sponsored
Femtosecond Applications Benefit from Ytterbium Amplifiers

Learn how Monaco extends capabilities and enables new experiments in diverse fields such as THz microscopy, metal texturing, and multiphoton imaging.

Aug 28th, 2019
A Mini Blackbird SXGA MWIR detector is one of the MWIR detectors that SCD will provide in its three contracts.
Detectors & Imaging
SCD awarded several contracts to supply MWIR high-definition detectors

Three contracts totaling $40 million were signed with three different European and North American customers.

John Wallace
Sep 4th, 2019
Military aircraft, missile tracking systems, and ground troops who rely on night-vision systems could benefit from a new generation of infrared imaging devices made with a powerful semiconducting material developed by University of Arkansas researchers and their colleagues at several institutions.
Detectors & Imaging
DoD awards University of Arkansas $7.5M to advance infrared detectors

The $7.5 million dollar award from the U.S. Department of Defense (DoD) is part of its Multidisciplinary University Research Initiative, or MURI.

Gail Overton
Aug 30th, 2019
These sensors from the SmartSens/MEMS Drive partnership will feature added stabilization control to the rotation of the sensor, achieving optimal stabilization with no less than 5 axes.
Detectors & Imaging
SmartSens partners with MEMS Drive on CMOS chip-based image stabilization

The companies will collaborate on research in the field of CMOS chip-level optical image stabilization (OIS) technologies for new application areas.

Gail Overton
Aug 28th, 2019
James C. Wyant with Maria Ruiz in 2014, a first-year graduate student at the College of Optical Sciences, who that year received a Louise Wyant Memorial Scholarship in Optical Sciences. James Wyant and his family are now contributing $2 million and SPIE $500,000 to an educational-funding initiative for optics and photonics.
Optics
With $500,000 grant to University of Arizona, SPIE launches $2.5 million endowment matching program

John Wallace
Aug 22nd, 2019
Gooch & Housego (G&H) is partnering with Optex Systems to provide acrylic sighting instruments to the European market. Shown here are some Optex sighting systems.
Optics
Gooch & Housego partners with Optex to supply acrylic optics

The partnership combines Optex acrylic periscope products with G&H’s next-generation glass periscope hardware portfolio.

Gail Overton
Aug 22nd, 2019
Tracks of heavy ions 'imprinted' in lithium fluoride crystals. At the top, spot tracks observed under a fluorescence microscope in plates perpendicular to the heavy ion beam. At the bottom, the ion tracks in the parallel oriented plate (the blurring at both ends of the trace is an artifact of the depth of focus of the microscope). False colors.
Detectors & Imaging
Lithium fluoride fluorescent crystals track high-energy heavy ions such as iron

In comparison to previous crystals such as aluminum oxide, LiF crystals also require a less expensive microscope for analysis.

John Wallace
Aug 19th, 2019
A fast, low-cost, highly sensitive diffuse optical imaging system acquires optical transmission images dorsally to provide objective, quantitative analysis for rheumatoid arthritis (RA) diagnosis and monitoring.
Test & Measurement
Spectroscopy/Optical Imaging: Fourier-transform analysis helps optical method improve RA detection

A noninvasive near-infrared diffuse optical imaging (DOI) system combines 3D digital imaging and infrared (IR) spectroscopy to map blood content in a patient’s hand for detection of rheumatoid arthritis.

Barbara Gefvert
Aug 13th, 2019
FIGURE 1. The tip of a 30,000-core optical fiber bundle is shown next to an Australian 5 cent coin for scale (left) and a zoomed-in image (right) reveals a small region of the fiber bundle facet (dashed red box in left). Each core is roughly 2 µm in diameter and separated from its neighbors by an average of 3.3 µm.
Fiber Optics
Fiber-optic Components: Fiber-optic bundles provide 3D stereo imaging

With each fiber acting as an independent pixel, coherent fiber bundles transmit more information than just a 2D representation of an image; specifically, the spatial light field faithfully encodes 3D stereo data.

Aug 13th, 2019
FIGURE 1. The mode of operation of a DCFC for extraction of fluorescence emission is shown.
Detectors & Imaging
Optical Coherence Tomography/Fluorescence Imaging: Fiber assembly enables efficient multimodal endoscopy

Double-clad fiber couplers (DCFCs) enable seamless and efficient combinations of modalities for robust fiber-based imaging and other biomedical applications.

Aug 13th, 2019