Military researchers ask industry to develop electro-optical imaging sensors for SWaP-constrained uses

Oct. 5, 2023
Decreasing the noise in optical detection could increase chances of deploying advanced optical technologies in SWaP-constrained systems.

Republished with permission from Military & Aerospace Electronics, a brand in Endeavor Business Media’s Design & Engineering Group alongside Laser Focus World.

U.S. military researchers are approaching industry for new electro-optical enabling technologies to enhance the precision and sensitivity of optical sensors in SWaP-constrained applications like active imaging; atomic sensing; navigation; microscopy; and communications.

Officials of the U.S. Defense Advanced research Projects Agency (DARPA; Arlington, VA) have released a broad agency announcement (HR001123S0052) for the Intensity-Squeezed Photonic Integration for Revolutionary Detectors (INSPIRED) project.

The goal is develop small size, weight, and power consumption (SWaP) optical sensors with sensitivity below the quantum shot noise limit by using so-called squeezed light. Several contractors are expected to participate in this program.

Low-noise detectors are vital components in optical science and technology, DARPA researchers explain. Decreasing the noise in optical detection could increase chances of deploying advanced optical technologies in SWaP-constrained systems.

Related: Air Force researchers focus on meta optics for small, inexpensive electro-optical sensors in small UAVs

The quantum sensing advantage of squeezed light to date has not exceeded 10 decibels due to imperfections in even the highest-quality discrete optics. Yet recent advances in nonlinear integrated photonics and heterogeneous integration are beginning to enable chip-scale photonic devices to outperform bulk discrete optical components.

The nonlinear effects that generate squeezed light are more efficient in chip-scale devices than in bulk devices due to stronger field confinement, researchers say. The inherent stability of solid-state photonic circuits and flexible component design also may provide significant performance advantages in manipulating quantum states of light.

The objective of the INSPIRED program is to develop electro-optical detector modules that integrate squeezed-light measurement techniques into form factors comparable to commercial photodetector modules, and increase sensitivity well beyond the quantum shot-noise limit, researchers say.

Related: Wide-area electro-optical surveillance for perimeter security and border control introduced by Clear Align

Getting there, though, will require broad innovation in materials, design, and fabrication to realize chip-scale photonic devices and circuits that efficiently can prepare, manipulate, and detect quantum states of light.

One challenging aspect of the program lies in achieving low aggregate loss in complex multi-component photonic circuits. Other challenges include generating a high squeezing ratio in size- and power-constrained photonic devices. Ultimately, producing such electro-optical systems should enable INSPIRED detectors to measure weak signals with high sensitivity.

The three-year INSPIRED program has two phases to develop a squeezed-light detector prototype. The first phase will develop the central chip-scale photonic devices for a squeezed-light detector, which will include a squeezed-light generator with high squeezing ratio and a phase-sensitive interferometer circuit with low optical loss.

Related: Leonardo DRS to provide electro-optical sensors for Australian vetronics to see outside when buttoned-up

The second phase will demonstrate squeezed-light detector prototypes with sensitivity exceeding the quantum shot noise limit in a module with volume comparable to commercial photodetector components. This will include a prototype module using phase-one test articles.

Companies interested should submit abstracts no later than 20 Oct. 2023, and full proposals by 13 Dec. 2023 to the DARPA BAA website online at https://baa.darpa.mil.

Email questions or concerns to DARPA's Justin Cohen to [email protected]. More information is online at https://sam.gov/opp/b6bdb0f703c144728d937ebe82315f26/view.

About the Author

John Keller | Editor-in-Chief, Military & Aerospace Electronics

John Keller is the Editor-in-Chief of Military & Aerospace Electronics, a brand in Endeavor Business Media’s Design & Engineering Group alongside Laser Focus World. The brand provides extensive coverage and analysis of enabling electronics and optoelectronic technologies in military, space, and commercial aviation applications.

John has been a member of the Military & Aerospace Electronics staff since 1989 and chief editor since 1995.

Sponsored Recommendations

Demonstrating Flexible, Powerful 5-axis Laser Micromachining

Sept. 18, 2024
Five-axis scan heads offer fast and flexible solutions for generating precise holes, contoured slots and other geometries with fully defined cross sections. With a suitable system...

Optical Filter Orientation Guide

Sept. 5, 2024
Ensure optimal performance of your optical filters with our Orientation Guide. Learn the correct placement and handling techniques to maximize light transmission and filter efficiency...

Advanced Spectral Accuracy: Excitation Filters

Sept. 5, 2024
Enhance your fluorescence experiments with our Excitation Filters. These filters offer superior transmission and spectral accuracy, making them ideal for exciting specific fluorophores...

Raman Filter Sets for Accurate Spectral Data

Sept. 5, 2024
Enhance your Raman spectroscopy with our specialized Raman Filter Sets. Designed for high precision, these filters enable clear separation of Raman signals from laser excitation...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!