Raman spectroscopy algorithm could better detect breast cancer

June 6, 2013
A single-step Raman spectroscopy algorithm developed by researchers at the Massachusetts Institute of Technology (MIT) has the potential to simultaneously detect microcalcifications and enable diagnosis of the associated breast lesions with high precision.

A single-step Raman spectroscopy algorithm developed by researchers at the Massachusetts Institute of Technology (MIT; Cambridge, MA) has the potential to simultaneously detect microcalcifications and enable diagnosis of the associated breast lesions with high precision.

X-ray mammography is currently the only accepted routine screening method for early detection of breast cancer, but it cannot accurately distinguish whether microcalcifications (microscopic areas of calcium accumulation) are associated with benign or malignant breast lesions, according to Ishan Barman, Ph.D., postdoctoral fellow at MIT and the study’s lead author. So most patients undergo core needle biopsy to determine if the microcalcifications are associated with malignancy, but the technique fails to retrieve microcalcifications in about 15 to 25 percent of patients. This results in nondiagnostic or false-negative biopsies, requiring the patient to undergo repeat and often surgical biopsy.

Related: New microscopy method and 3D culture enable study of breast cancer risk factors

Related: Technology advances breast cancer imaging

According to the researchers, the newly developed Raman spectroscopy algorithm exhibited positive and negative predictive values of 100 percent and 96 percent, respectively, for the diagnosis of breast cancer with or without microcalcifications. The algorithm also showed an overall accuracy of 82 percent for classification of the samples into normal, benign, or malignant lesions.

“There is an unmet clinical need for a tool that could minimize the number of x-rays and biopsy procedures. This tool could shorten procedure time; reduce patient anxiety, distress, and discomfort; and prevent complications such as bleeding into the biopsy site after multiple biopsy passes,” says Barman. “Our study demonstrates the potential of Raman spectroscopy to simultaneously detect microcalcifications and diagnose associated lesions with a high degree of accuracy, providing real-time feedback to radiologists during the biopsy procedures.”

The researchers used a portable clinical Raman spectroscopy system to obtain Raman spectra from breast tissue biopsy specimens of 33 women. They collected Raman spectra from 146 tissue sites within the samples, including 50 normal tissue sites, 77 lesions with microcalcifications, and 19 lesions without microcalcifications. Notably, they acquired all spectra within 30 minutes of sample removal.

Barman and colleagues fitted the obtained spectra into a model that identifies the different type and texture of various components of the breast tissue. They then developed a single-step Raman algorithm to distinguish normal breast tissue, breast cancer with and without microcalcifications, and other benign breast lesions including fibrocystic change and fibroadenoma.

In addition, the majority of breast cancers diagnosed using the one-step Raman algorithm were ductal carcinoma in situ, the most common lesion associated with microcalcifications, which is a challenge to diagnose using existing methods, according to Barman.

The study has been published in Cancer Research, a journal of the American Association for Cancer Research. For more information, please visit http://cancerres.aacrjournals.org/content/73/11/3206.abstract?sid=fc4cfc67-dafd-44d3-80e2-42abef63da0a.

-----

Follow us on Twitter, 'like' us on Facebook, and join our group on LinkedIn

Subscribe now to BioOptics World magazine; it's free!

Sponsored Recommendations

On demand webinar: Meet BMF’s first hybrid resolution printer, the microArch D1025

July 26, 2024
Join us in this webinar to explore our newest product release - the microArch D1025 - our first dual-resolution printer. Learn more!

Meet the microArch D1025: Hybrid Resolution 3D Printing Technology

July 26, 2024
Meet BMF's newest release, our first dual-resolution printer for the prototyping and production of parts requiring micron-level precision.

Optical Power Meters for Diverse Applications

April 30, 2024
Bench-top single channel to multichannel power meters, Santec has the power measurement platforms to meet your requirements.

Request a quote: Micro 3D Printed Part or microArch micro-precision 3D printers

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!