Ultrafast pulses briefly turn carbon 'buckyballs' into high-temperature superconductor

Dec. 1, 2017
The material takes on superconductive properties, albeit extremely briefly, up to a temperature of -73°C-almost 100 degrees above the critical equilibrium temperature.

The most-well-known carbon fullerene, C60, otherwise known as a buckyball, when made into a potassium-containing compound with the chemical formula K3C60, can normally behave as a superconductor below a critical temperature of 20 K. It has now been discovered by an international group of researchers that K3C60 transforms into a high-temperature superconductor when struck by an ultrafast laser pulse. The material takes on superconductive properties, albeit extremely briefly, up to a temperature of -73°C—almost 100 degrees above the critical equilibrium temperature. The research explains the reason for this mysterious behavior.

K3C60 is a compound in which purely molecular features coexist alongside metallic properties, a characteristic shared by so-called strongly correlated materials. According to the theory developed by the researchers in this study, the laser beam creates a high-energy molecular excitation—yet to do so, it must absorb heat from the low-energy metallic component, which thus cools. As it is specifically the metallic component involved in conduction, its cooling may lead to a superconductivity phase despite the fact that the external temperature is higher than the critical temperature. The researchers note that this is an example of laser cooling, but with a previously unknown operating mechanism—the phenomenon may enable the manufacture of electronic devices whose properties can be switched by light. Reference: A. Nava et al., Nat. Phys. (2017); doi:10.1038/nphys4288.

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

Request a quote: Micro 3D Printed Part or microArch micro-precision 3D printers

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.

How to Tune Servo Systems: The Basics

April 10, 2024
Learn how to tune a servo system using frequency-based tools to meet system specifications by watching our webinar!

Precision Motion Control for Sample Manipulation in Ultra-High Resolution Tomography

April 10, 2024
Learn the critical items that designers and engineers must consider when attempting to achieve reliable ultra-high resolution tomography results here!

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!