MIPT says Weyl semimetals are the perfect laser gain media

May 9, 2019
In this "wonder material", radiative recombination dominates over Auger recombination.

Weyl semimetals are a recently discovered class of materials, in which charge carriers behave the way electrons and positrons do in particle accelerators. Researchers from the Moscow Institute of Physics and Technology and Ioffe Institute in St. Petersburg, Russia have shown that these materials represent perfect gain media for lasers. The research findings were published in Physical Review B.

The 21st-century physics is marked by the search for phenomena from the world of fundamental particles in tabletop materials. In some crystals, electrons move as high-energy particles in accelerators. In others, particles even have properties somewhat similar to black hole matter.

MIPT physicists have turned this search inside-out, proving that reactions forbidden for elementary particles can also be forbidden in the crystalline materials known as Weyl semimetals. Specifically, this applies to the forbidden reaction of mutual particle-antiparticle annihilation without light emission. This property suggests that a Weyl semimetal could be the perfect gain medium for lasers.

In a semiconductor laser, radiation results from the mutual annihilation of electrons and the positive charge carriers called holes. However, light emission is just one possible outcome of an electron-hole pair collision. Alternatively, the energy can build up the oscillations of atoms nearby or heat the neighboring electrons. The latter process is called Auger recombination, in honor of the French physicist Pierre Auger (pronounced oh-ZHAY’).

Auger recombination limits the efficiency of modern lasers in the visible and infrared range, and severely undermines terahertz lasers. It eats up electron-hole pairs that might have otherwise produced radiation. Moreover, this process heats up the device.

For almost a century, researchers have sought a "wonder material" in which radiative recombination dominates over Auger recombination. This search was guided by an idea formulated in 1928 by Paul Dirac. He developed a theory that the electron, which had already been discovered, had a positively charged twin particle, the positron. Four years later, the prediction was proved experimentally. In Dirac’s calculations, a mutual annihilation of an electron and positron always produces light and cannot impart energy on other electrons. This is why the quest for a wonder material to be used in lasers was largely seen as a search for analogues of the Dirac electron and positron in semiconductors.

"In the 1970s, the hopes were largely associated with lead salts, and in the 2000s - with graphene," says Dmitry Svintsov, the head of the ​Laboratory of 2D Materials for Optoelectronics at MIPT. "But the particles in these materials exhibited deviations from Dirac's concept. The graphene case proved quite pathological, because confining electrons and holes to two dimensions actually gives rise to Auger recombination. In the 2D world, there is little space for particles to avoid collisions."

"Our latest paper shows that Weyl semimetals are the closest we’ve gotten to realizing an analogy with Dirac's electrons and positrons," added Svintsov, who was the principal investigator in the reported study.

See SOURCE below for details of the findings.

The team gauged the lifetime of an electron-hole pair in a Weyl semimetal to be about 10 nanoseconds. That timespan looks extremely small by everyday standards, but for laser physics, it is huge. In conventional materials used in laser technology of the far infrared range, the lifetimes of electrons and holes are thousands of times shorter. Extending the lifetime of nonequilibrium electrons and holes in novel materials opens up prospects for using them in new types of long-wavelength lasers.

SOURCE: MIPT; https://mipt.ru/english/news/physicists_propose_perfect_material_for_lasers

About the Author

Gail Overton | Senior Editor (2004-2020)

Gail has more than 30 years of engineering, marketing, product management, and editorial experience in the photonics and optical communications industry. Before joining the staff at Laser Focus World in 2004, she held many product management and product marketing roles in the fiber-optics industry, most notably at Hughes (El Segundo, CA), GTE Labs (Waltham, MA), Corning (Corning, NY), Photon Kinetics (Beaverton, OR), and Newport Corporation (Irvine, CA). During her marketing career, Gail published articles in WDM Solutions and Sensors magazine and traveled internationally to conduct product and sales training. Gail received her BS degree in physics, with an emphasis in optics, from San Diego State University in San Diego, CA in May 1986.

Sponsored Recommendations

Request a quote: Micro 3D Printed Part or microArch micro-precision 3D printers

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a Micro 3D Printed Benchmark Part: Send us your file.

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.

How to Tune Servo Systems: The Basics

April 10, 2024
Learn how to tune a servo system using frequency-based tools to meet system specifications by watching our webinar!

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!