"Smart" fluorescent dyes change color in different solid states

Aug. 22, 2018
Scientists in Japan have developed a unique organic fluorophore that changes its emission color when externally stimulated.

Controlling the excited electronic states in luminescent systems remains a challenge in the development of fluorescent and phosphorescent dyes. Now, scientists in Japan have developed a unique organic fluorophore that changes its emission color without loss of efficiency when externally stimulated. The study published in the journal Angewandte Chemieexplains this behavior by a simple phase transformation of the solid substance, which could be relevant for optoelectronic applications such as in smart OLEDs.

Although luminescence is an extensively studied phenomenon and its theoretical basis is well understood, the development of new pigments and dyes with outstanding functionality is not straightforward. Phase transitions of a solid material may quench the fluorescence, and pigments in OLED applications are prone to aging. Now, the research group of Takuma Yasuda at Kyushu University, Fukuoka, Japan, has synthesized a green emitting pigment that responds to external stimuli by a remarkable color change into orange emission, and that without no observed loss in luminescence efficiency. This two-color behavior of one pigment might by highly useful for the development of smart optoelectronic and sensor systems.

To obtain efficient luminescent systems, scientists are increasingly focusing on the excited states and the electronic transitions: The more distinct and defined the electronic transitions are, the more efficient is the light emission when the substance is excited by light of other wavelengths or electric energy. On the other hand, disturbances of the molecular structure can trigger nonradiative relaxation, and then, most fluorescence is lost. Here, Yasuda and his group found that their synthesized fluorophore, which has an elongated and relatively simple symmetric structure incorporating well-known chromophores, can switch its emission colors between orange and green when changing solid-state morphologies.

The authors substantiated their findings with X-ray crystallographic analyses and theoretical calculations. They found that the amorphous phase holds a slightly relaxed excited state compared to the crystalline one. This was explained by a twist in the molecule, which occurred at a different angle when the crystal structure was broken. Accordingly, the light emitted from that amorphous-phase excited state was at a longer wavelength than that emitted from the excited crystalline state.

Such a two-color emission from different solid phases could be useful for sophisticated optoelectronic and sensor applications. The Japanese authors found that the substance emitted orange fluorescence when deposited as a thin film, but this color turned to green when the film was annealed, that is, kept at high temperature and cooled down again. Then they scratched the annealed film and found orange fluorescence exactly at the places of scratching; even writing words in orange fluorescence was possible.

A more demanding application is that in organic light-emitting devices, the OLEDs. Sandwiched in an OLED setup, the compound exhibited bright electroluminescence, either in green when in the crystalline phase or in orange color when in the amorphous phase. This two-color electroluminescence from one pigment might be highly interesting for the ongoing research on stimuli-responsive smart materials.

SOURCE: Eurakalert; https://www.eurekalert.org/pub_releases/2018-08/w-sfd081618.php

About the Author

Gail Overton | Senior Editor (2004-2020)

Gail has more than 30 years of engineering, marketing, product management, and editorial experience in the photonics and optical communications industry. Before joining the staff at Laser Focus World in 2004, she held many product management and product marketing roles in the fiber-optics industry, most notably at Hughes (El Segundo, CA), GTE Labs (Waltham, MA), Corning (Corning, NY), Photon Kinetics (Beaverton, OR), and Newport Corporation (Irvine, CA). During her marketing career, Gail published articles in WDM Solutions and Sensors magazine and traveled internationally to conduct product and sales training. Gail received her BS degree in physics, with an emphasis in optics, from San Diego State University in San Diego, CA in May 1986.

Sponsored Recommendations

Request a quote: Micro 3D Printed Part or microArch micro-precision 3D printers

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.

How to Tune Servo Systems: The Basics

April 10, 2024
Learn how to tune a servo system using frequency-based tools to meet system specifications by watching our webinar!

Precision Motion Control for Sample Manipulation in Ultra-High Resolution Tomography

April 10, 2024
Learn the critical items that designers and engineers must consider when attempting to achieve reliable ultra-high resolution tomography results here!

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!