Harvard and Argonne National Lab cooperate to create MEMS-scanning metalenses

Feb. 20, 2018
High-speed dynamic control is combined with precise spatial manipulation of wavefronts for lidar, microscopy, and other uses.

Two technologies familiar to our audience at Laser Focus Worldmetasurface lenses and MEMSare being united by researchers at Harvard University's John A. Paulson School of Engineering and Applied Sciences (SEAS; Cambridge, MA) and Argonne National Laboratory (Lemont, IL). Metasurface lenses are made of arrays of slowly varying, almost periodic subwavelength structures that can be lithographically fabricated on a flat surface; such a metalens, which is very lightweight, can focus monochromatic or multiwavelength light and serve other optical purposes as well. Microelectromechanical systmes (MEMS) are well-known as the technology behind digital light processing (DLP) mirror arrays, as well as many other micoromechanical components in photonics systems.

Combining metasurface lenses with MEMS can add motion capabilities like fast scanning and beam steering to metalenses for new applications.

Federico Capasso, an applied physicist at Harvard who pioneered metasurface lens technology, and Daniel Lopez, group leader of nanofabrication and devices at Argonne National Laboratory and an early developer of MEMS, have developed a device that integrates mid-infrared-spectrum metalenses onto MEMS.1


"Dense integration of thousands of individually controlled lens-on-MEMS devices onto a single silicon chip would allow an unprecedented degree of control and manipulation of the optical field," says Lopez.

The researchers formed the metasurface lens using standard photolithography techniques on a silicon-on-insulator wafer with a 2-µm-thick top device layer, a 200 nm buried-oxide layer, and a 600-µm-thick handle layer. Then they placed the flat lens onto a MEMS scanner for high-speed optical-path-length modulation. They aligned the lens with the MEMS' central platform and fixed them together by depositing small platinum patches.

"Our MEMS-integrated metasurface lens prototype can be electrically controlled to vary the angular rotation of a flat lens and can scan the focal spot by several degrees," Lopez says. "Furthermore, this proof-of-concept integration of metasurface-based flat lenses with MEMS scanners can be extended to the visible and other parts of the electromagnetic spectrum, implying the potential for application across wider fields, such as MEMS-based microscope systems, holographic and projection imaging, lidar (light detection and ranging) scanners and laser printing."

When electrostatically actuated, the MEMS platform controls the angle of the lens along two orthogonal axes, allowing the scanning of the flat lens focal spot by about 9° in each direction. The researchers estimate that the focusing efficiency is about 85%.

"Such metalenses can be mass produced with the same computer-chip fabrication technology and in the future, will replace conventional lenses in a wide range of applications," Capasso says. These include miniaturized MEMS-based microscope systems, lidar scanners, and projection systems.

Source: https://www.eurekalert.org/pub_releases/2018-02/aiop-mcg022018.php

REFERENCE:

1. Tapashree Roy et al., APL Photonics (2018); doi: 10.1063/1.5018865

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

How Precision Motion Systems are Shaping the Future of Semiconductor Manufacturing

March 28, 2024
This article highlights the pivotal role precision motion systems play in supporting the latest semiconductor manufacturing trends.

Understanding 3D Printing Tolerances: A Guide to Achieving Precision in Additive Manufacturing

March 28, 2024
In the world of additive manufacturing, precision is paramount. One crucial aspect of ensuring precision in 3D printing is understanding tolerances. In this article, we’ll explore...

Automation Technologies to Scale PIC Testing from Lab to Fab

March 28, 2024
This webinar will cover the basics of precision motion systems for PIC testing and discuss the ways motion solutions can be specifically designed to address the production-scale...

Case Study: Medical Tube Laser Processing

March 28, 2024
To enhance their cardiovascular stent’s precision, optimize throughput and elevate part quality, a renowned manufacturer of medical products embarked on a mission to fabricate...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!