Shortest wavelength yet (0.002 nm) reflected from multilayer-coated mirror

Sept. 12, 2014
Researchers at Lawrence Livermore National Laboratory (LLNL; Livermore, CA), the University of Denmark (Lyngby, Denmark) and the European Synchrotron Radiation Facility (Grenoble, France) have created very-short-period multilayer coatings deposited on superpolished substrates that are designed for use with soft gamma-ray photons.

The technology behind thin-film multilayer high-reflection coatings, widely used on optics for use in the UV through IR wavelength ranges, can be pushed, and pushed hard. Researchers at Lawrence Livermore National Laboratory (LLNL; Livermore, CA), the University of Denmark (Lyngby, Denmark) and the European Synchrotron Radiation Facility (Grenoble, France) have created very-short-period multilayer coatings deposited on superpolished substrates that are designed for use with soft gamma-ray photons.1 Their efforts have resulted in grazing-incidence-reflection coatings that reflect photons with energies up to 0.65 MeV (about 0.002 nm wavelength), which is almost two times higher than the previous record of 384 keV set by the same group in 2013.2

One of the consequences of the experiment was the confirmation that the conventional Bragg scattering theory used for thin-film multilayer coatings in the optical (for example, visible) range continues to hold in the gamma-ray region.

The researchers used a common approach for creating short-wavelength mirrors (such as x-ray mirrors): designing for grazing-incidence angles. This does three things: first, it raises material reflectivity, which depends on incidence angle; second, it spreads optical power across a larger area of the mirror; and third, it increases the layer thickness for Bragg reflection. In the case of 0.65 MeV gamma rays, a normal-incidence half-wave thickness on the order of 0.001 nm is increased to a more-manageable nanometer scale.

1.5 nm coating layer-pair period
In the experiment, the chosen grazing-incidence angle of 0.0375° enlarged the 65 μm beam height to a 110 mm beam footprint along the mirror for the first-order Bragg angle reflection. The coating itself consisted of 300 layer pairs (tungsten carbide and silicon carbide) with a 1.5 nm period (having a 4% peak-to-valley variation) on superpolished quartz.

Such gamma-ray grazing-incidence coatings can be applied to toroidal substrates to create focusing gamma-ray optics for astronomy and physics research. One example of an astronomical application is the cosmic mapping of the very important electron-positron annihilation line at 0.511 MeV.

REFERENCES:

1. Nicolai F. Brejnholt et al., Optics Express (2014); http://dx.doi.org/10.1364/OE.22.015364

2. Mónica Fernández-Perea et al., Physical Review Letters (2013); http://link.aps.org/doi/10.1103/PhysRevLett.111.027404

Sponsored Recommendations

Request a quote: Micro 3D Printed Part or microArch micro-precision 3D printers

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.

How to Tune Servo Systems: The Basics

April 10, 2024
Learn how to tune a servo system using frequency-based tools to meet system specifications by watching our webinar!

Precision Motion Control for Sample Manipulation in Ultra-High Resolution Tomography

April 10, 2024
Learn the critical items that designers and engineers must consider when attempting to achieve reliable ultra-high resolution tomography results here!

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!