Final report from the International Year of Light points toward photonics policy and education needs

Oct. 4, 2016
The official final report on the UN’s IYL2015 was delivered to UNESCO's Assistant Director-General for Natural Sciences, Flavia Schlegel.  

The official final report on the UN’s International Year of Light and Light-based Technologies in 2015 (IYL2015) was delivered to UNESCO's Assistant Director-General for Natural Sciences, Flavia Schlegel, on October 3. The ability to make further progress depends as much on government policy as scientific innovation--and the ability to overcome communication and value gaps that separate them, noted SPIE CEO Eugene Arthurs.

Such communication is critical if global Sustainable Development Goals (SDGs) established by the United Nations are to be met, according to Arthurs, who was speaking at the UNESCO headquarters in Paris. He added that politicians need to understand the importance of light-based technologies to the safety and well-being of citizens, and the photonics community needs to keep sharing this message including updates as new capabilities are developed.

Flavia Schlegel said the IYL2015 report was "the best final report that I have seen so far ... many congratulations to the many consortia partners who made this year possible." She noted that the observance had included 13,168 events in 147 countries.

In her remarks, Ana María Cetto of the Instituto de Física, UNAM, and director of the Museum of Light, México, advocated for a designated Day of Light on 16 May, the anniversary of the first successful firing of a laser. During IYL2015, she said, “many activities were established that should not stop.” Establishing a Day of Light could create new opportunities to continue to work together.

“The IYL2015 has provided a timely reminder that through our commitment to education and outreach, we can really make a difference,” said John Dudley, Chair of the IYL015 Steering Committee. “It is now up to us to build on what we have learned and what we have accomplished during 2015 to continue to work together for the betterment of all.”

The final report may be downloaded from this page: http://www.light2015.org/Home/About/IYL-Final-Report.html (PDF 40 MB).

Source: SPIE

About the Author

Conard Holton

Conard Holton has 25 years of science and technology editing and writing experience. He was formerly a staff member and consultant for government agencies such as the New York State Energy Research and Development Authority and the International Atomic Energy Agency, and engineering companies such as Bechtel. He joined Laser Focus World in 1997 as senior editor, becoming editor in chief of WDM Solutions, which he founded in 1999. In 2003 he joined Vision Systems Design as editor in chief, while continuing as contributing editor at Laser Focus World. Conard became editor in chief of Laser Focus World in August 2011, a role in which he served through August 2018. He then served as Editor at Large for Laser Focus World and Co-Chair of the Lasers & Photonics Marketplace Seminar from August 2018 through January 2022. He received his B.A. from the University of Pennsylvania, with additional studies at the Colorado School of Mines and Medill School of Journalism at Northwestern University.

Sponsored Recommendations

Brain Computer Interface (BCI) electrode manufacturing

Jan. 31, 2025
Learn how an industry-leading Brain Computer Interface Electrode (BCI) manufacturer used precision laser micromachining to produce high-density neural microelectrode arrays.

Electro-Optic Sensor and System Performance Verification with Motion Systems

Jan. 31, 2025
To learn how to use motion control equipment for electro-optic sensor testing, click here to read our whitepaper!

How nanopositioning helped achieve fusion ignition

Jan. 31, 2025
In December 2022, the Lawrence Livermore National Laboratory's National Ignition Facility (NIF) achieved fusion ignition. Learn how Aerotech nanopositioning contributed to this...

Nanometer Scale Industrial Automation for Optical Device Manufacturing

Jan. 31, 2025
In optical device manufacturing, choosing automation technologies at the R&D level that are also suitable for production environments is critical to bringing new devices to market...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!