Crystal IS receives $5M DARPA award for germicidal UV LEDs

Dec. 8, 2010
Green Island, NY--Crystal IS was awarded $5 million dollars by DARPA to develop LEDs operating below 275 nm for use in water sterilization and numerous other applications.

Green Island, NY--Crystal IS, developer of ultraviolet C (short wave) light-emitting diodes (UVC LEDs), announced it has been awarded $5 million dollars by the Defense Advanced Research Projects Agency (DARPA). The goal of the program is the development of efficient LEDs operating below 275 nm for use in water sterilization and numerous other applications of significant interest to the Department of Defense.

"DARPA selected us for this award based upon the performance of our existing 265nm LEDs that leverage our proprietary aluminum nitride (AlN) substrate technology," said Steven Berger, CEO of Crystal IS. "With the tremendous help provided by DARPA, we believe we will accelerate the development cycle and bring bright, efficient, and long lifetime UVC LEDs to market sooner."

The development will take place at the Crystal IS facility in Green Island, NY and will run in parallel with the company’s recently announced effort to produce large diameter AlN substrates.

"To make the project as successful as possible we have assembled a group of expert collaborators," said Leo Schowalter, CTO and founder of Crystal IS. "These include industrial and university partners and a Cooperative Research Agreement with the Army Research Laboratory, administered by Dr. Wraback. Combined with our own resources this truly represents a world class team."

SOURCE: Crystal IS; www.crystal-is.com/press.cfm/newsitem/86370

Subscribe now to Laser Focus World magazine; It’s free!

Follow us on Twitter

About the Author

Gail Overton | Senior Editor (2004-2020)

Gail has more than 30 years of engineering, marketing, product management, and editorial experience in the photonics and optical communications industry. Before joining the staff at Laser Focus World in 2004, she held many product management and product marketing roles in the fiber-optics industry, most notably at Hughes (El Segundo, CA), GTE Labs (Waltham, MA), Corning (Corning, NY), Photon Kinetics (Beaverton, OR), and Newport Corporation (Irvine, CA). During her marketing career, Gail published articles in WDM Solutions and Sensors magazine and traveled internationally to conduct product and sales training. Gail received her BS degree in physics, with an emphasis in optics, from San Diego State University in San Diego, CA in May 1986.

Sponsored Recommendations

Advancing Neuroscience Using High-Precision 3D Printing

March 7, 2025
Learn how Cold Spring Harbor Laboratory Used High-Precision 3D Printing to Advance Neuroscience Research using 3D Printed Optical Drives.

From Prototyping to Production: How High-Precision 3D Printing is Reinventing Electronics Manufacturing

March 7, 2025
Learn how micro 3D printing is enabling miniaturization. As products get smaller the challenge to manufacture small parts increases.

What are Notch Filters?

Feb. 27, 2025
Notch filters are ideal for applications that require nearly complete rejection of a laser line while passing as much non-laser light as possible.

Using Optical Filters to Optimize Illumination in Fluorescence and Raman Systems

Feb. 27, 2025
Discover how Semrock products can help you get the most out of your fluorescence and Raman excitation designs, regardless of light source.

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!