Automated Laser Safety Sign and Warning Light Controller

July 21, 2022

Kentek’s ACM-AUTOTM Automated Laser Safety Sign and Warning Light Controller allows automatic control of one or more 12VDC powered devices, triggered by the ampere draw of the laser. This device is used to power one or more single-status signs when the connected laser draws current removing the need for a manual switch to control the sign(s) status.

This automated laser safety sign controller senses current draw of a single laser and applies 12 V dc to 1-4 external sign(s). Plug the ACM-AUTO™ into a 120 V ac wall receptacle, then plug your laser into the device. Energized laser must draw between 1.5 and 15 amps @ 120 V ac to trigger sign power. Total current draw for selected signs should not exceed 2.1 amps.

Housing Dimensions: 7.50 L x 7.50 W x 3.00 D (inches)

Control Panel Weight: 2.5 Pounds (Approx.)

Includes: One power cable, 6 feet in length, a four-position 12V dc terminal block in housing, an active LED indicator light, and an operation manual.

Learn More

By clicking above, I acknowledge and agree to Endeavor Business Media’s Terms of Service and to Endeavor Business Media's use of my contact information to communicate with me about offerings by Endeavor, its brands, affiliates and/or third-party partners, consistent with Endeavor's Privacy Policy. In addition, I understand that my personal information will be shared with any sponsor(s) of the resource, so they can contact me directly about their products or services. Please refer to the privacy policies of such sponsor(s) for more details on how your information will be used by them. You may unsubscribe at any time.