Laser Focus World Products

Video motion detection system from Controp detects moving intruders day or night

The 3D-Guard 3-dimensional video motion detection system for perimeter security uses two stationary cameras with fixed fields-of-view and a detection range up to 1000 m.

Diode controller from ILX combines precision current source with a thermoelectric TEC

The LDC-37620 high-power laser diode controller is designed to control single-emitter laser diodes and provide accurate, constant current or power operation.

Hollow waveguide from Molex delivers power from CO2 and Er:YAG

The Polymicro Technologies MediSpec hollow silica waveguide includes a visible aiming beam for alignment.

Spectrum analyzer from Bristol measures laser wavelength from the visible to the mid-IR

The 771 Series laser spectrum analyzer measures laser wavelength from the visible to the mid-IR to an accuracy as high as ± 0.0001 nm.

DUV light source from Cymer outputs 193 nm at 60 to 90 W

The XLR 700ix new argon fluoride deep-UV immersion light source has pulse energy of 10–15 mJ with a repetition rate of 6 kHz.

Power meter from Radiantis measures power levels from 1 nW to 20 W

The PowerSense power meter can measure power levels from 1 nW to 20 W with a single detector head, with millisecond response.

Laser heaters from Princeton Optronics are designed for additive manufacturing apps

Laser heating systems consisting of multiple VCSEL arrays provide power output of >4 kW at wavelengths of 808, 976, and 1064 nm.

Mini spectrometer from Lasnix covers the visible to terahertz region

A mini all-IR spectrometer covers this region in a permanently aligned, drift-free device for real-time monitoring of collimated beams from any light source.

Lens cementing station from Trioptics aligns and cements lens pairs

The MultiCentric Cementing Station uses a measurement head with three integrated, simultaneously measuring autocollimators to reduce process cycle time.

Multimode fiber from Fibercore is designed for use in harsh environments

Graded-index, pure-silica-core multimode fiber is designed for use in harsh environments, such as those encountered in the oil and gas industry.

Vibration cancellation system from TMC Ametek controls vibration in semiconductor fabs

The Stage-Base 450 frame-mountable motion cancellation system uses a serial-type architecture with voice coil technology to provide active floor vibration cancellation starting at 0.6 Hz.

MWIR bandpass filters from Iridian are used in single- and multiwavelength detection systems for PAS

The company’s narrow, mid-wave infrared (MWIR) gas bandpass filters (BPFs) optimize detection of narrow spectral emission lines and are deposited using energetic sputtering processes.

Spectroscopy camera from Horiba Scientific for low-light and ultrafast spectroscopy

The Synapse EM deep-cooled, EMCCD scientific camera is available in front- and back-illuminated versions.

Light sources from Labsphere are for use in calibration of cameras and sensors

CCS-1000 systems replace the halogen source inside a high-reflectance integrating sphere with 16 LEDs distributed over the visible and NIR range.

Tunable filter from Alnair Labs offers wavelength tunability from 1525 to 1610 nm

Tunable filter from Alnair Labs offers wavelength tunability from 1525 to 1610 nm

Silicon avalanche photodiode module from Excelitas delivers broadband photon absorption

The HeliX silicon avalanche photodiode (Si APD) module has uses in high-performance applications, including fluorescence measurement and distributed temperature sensing.

Spectrophotometer from McPherson measures reflectance from 120 nm to 2.2 micron

The vacuum UV universal spectrophotometer is an optical test system optimized for emitting samples like phosphors or photo- and electro-luminescent crystals.

Optomechanical lens assembly from RP Optical is designed for defense and industrial apps

The CEDAR is a high-performance, optomechanical, 15-100 mm, f/1.4 continuous-zoom lens assembly with a 6x zoom ratio.

Confocal microscope from Carl Zeiss allows users to achieve higher resolution

The LSM 800 confocal laser scanning microscope with Airyscan technology uses a multichannel area detector with 32 elements to collect light.

Pulsed fiber lasers from AdValue Photonics for use in lidar and spectroscopy apps

The AP-P-SF pulsed single-frequency fiber lasers are available with 1, 1.55, and 2 micron wavelength options.

Copyright © 2007-2014. PennWell Corporation, Tulsa, OK. All Rights Reserved. PRIVACY POLICY | TERMS AND CONDITIONS