Laser Focus World Products

DataRay beam profiler is suited for use with pulsed lasers

September 10, 2013

The WinCamD-LCM CMOS beam profiler provides a high-resolution 1 in. detector.

Radiant Zemax introduces optical and illumination design software

September 10, 2013

Zemax 13 Release 2 optical and illumination design software offers more than 70 new features, including a stock-lens matching tool.

Dye laser from Continuum presents precision birdirectional scanning

September 9, 2013

The Vista dye laser offers a resolution of <0.03 cm-1 with >30% efficiency.

Headwall Photonics' diffraction gratings are designed for OEM use

September 9, 2013

These small-form-factor, aberration-corrected diffraction gratings can withstand temperatures >80C.

Preciseley introduces MEMS optical shutter/chopper

September 6, 2013

This chip can be packaged directly into the beam line within a TO-can, optical connector, or other optical module.

Applied Scientific releases compact linear stages

September 6, 2013

The stages use crossed-roller slides, precision lead screws, and zero-backlash, miniature, geared DC servomotors for 50–200 mm travel.

Edmund Optics releases fast axis collimators

August 20, 2013

These collimators are compact, aspheric cylindrical lenses designed for beam shaping or laser diode collimation applications.

ID Quantique's single-photon detection system operates from 350 to 900 nm

August 20, 2013

The id110 gated visible single photon detector uses a silicon avalanche photodiode.

JML Optical Industries intros rapid prototyping capability

August 20, 2013

QuickTurn Optics is a rapid prototyping capability for custom optical assemblies and components in as little as 4 and 3 weeks, respectively; normal lead times are 10–12 weeks and 8–10 weeks.

Iridian Spectral Technologies releases laser reflection glasses

August 19, 2013

LaseReflect LRG10 glasses protect pilots and law enforcement from laser pointer attacks.

Newport's handheld optical power meter housed in compact body

August 19, 2013 The 843-R handheld optical power meter can measure laser energy and power levels from picojoules and picowatts up to thousands of watts.

Oven Industries' temperature controller runs with integrated potentiometers

August 16, 2013

The 5R1-1400 AC controller delivers up to 15 A of load current from a zero-voltage switched, low-noise, solid-state relay.

IXYS Colorado introduces MOSFET drivers

August 16, 2013

The IXRFD630 and IXRFD631 high-power RF MOSFET drivers are CMOS high-speed, high-current gate drivers.

Laser alignment station from Opto-Alignment measures individual lens surface errors

August 15, 2013

With this station, users can align and inspect lenses without changing objectives.

Duma Optronics releases beam profiler

August 15, 2013

The μBeam diagnostics system provides real-time measurement and display of small CW or pulsed lasers in the submicron range.

Assembly Guidance introduces fab management system

August 14, 2013 The Laserguide D3 fabrication management system handles three aspects of fabrication: data collection, defect prevention, and documentation.

Oriel Instruments' solar simulators meet Class ABB

August 14, 2013

The 38 x 38 mm LCS-100 Series of solar simulators is designed for photovoltaics researchers.

Thorlabs' vibration isolation tables use all-steel construction

August 13, 2013 The Nexus line of vibration isolation tables and breadboards have a precision-formed, welded steel honeycomb core with no intermediate layers.

NP Photonics releases supercontinuum fiber laser

August 13, 2013

The SpectraChrome mid-infrared supercontinuum fiber laser delivers a supercontinuum spectrum from 1000 to 4500 nm.

Attocube Systems' interferometric sensor detects position variations

August 12, 2013 The FPS3010 high-bandwidth interferometric displacement sensor can track target velocities of up to 1 m/s.
Copyright © 2007-2014. PennWell Corporation, Tulsa, OK. All Rights Reserved.PRIVACY POLICY | TERMS AND CONDITIONS