Laser Focus World Products

Focus module from New Scale is useful in handheld portable and mobile systems

November 13, 2014

The M3-FS all-in-one focus module for high-performance industrial, medical, and scientific OEM cameras offers a 3x improvement in dynamic tilt and linear accuracy over the previous model.

Illumination system from Specialised Imaging provides pulsed power of several hundred watts

November 13, 2014

The SI LUX640 laser illumination system is designed for use with high-speed video, an ultra-high-speed framing camera, Schlieren imaging, and Shadowgraph systems.

Spectrometer from McPherson can make wavelength steps as small as 0.11 pm

November 13, 2014

The 1.3 m focal length model 209 spectrometer with micro-step drive can make wavelength steps as small as 0.11 pm.

Metrology tool from Photal Otsuka Electronics measures yield

November 13, 2014

The QE-2000 quantum efficiency measurement system from Photal Otsuka Electronics measures the yield of powders, liquids, solids, and films.

UV laser from Photonics Industries provides pulse energy of greater than 20 mJ

November 13, 2014

The DM20-351 ultraviolet laser provides pulse energy of > 20 mJ at a repetition rate of 1 kHz, with beam quality of M2 ~10.

Spectrometer from Rigaku Raman indentifies raw materials

November 13, 2014

Progeny, a handheld Raman spectrometer for raw material identification, eliminates fluorescence interference using a 1064 nm excitation laser.

Fiber sensor interrogator from Aniber operates at a typical wavelength of 835 to 875 nm

November 13, 2014

The AN-FSI-800A fiber sensor interrogator is a device for measuring the output of up to 20 passive fiber sensors simultaneously at a sampling rate of 250 Hz.

UV curing equipment from Excelitas is a multipurpose external controller

November 13, 2014

The OmniCure PLC2000 is a multipurpose external controller that, when connected to the company’s UV LED head, allows management, monitoring, and control of the curing solution for a repeatable UV process.

Optics grinding system from OptiSonic allows rapid material removal

November 13, 2014

The OptiSonic optics grinding system is designed for grinding both hard materials and softer glasses including BK7 and fused silica.

Laser controller from ILX Lightwave provides low noise constant current operation

November 13, 2014

The LDC-3736 quantum cascade laser controller combines a precision current source with a 128 W thermoelectric temperature controller.

Laser diode from Oclaro provides 700 mW output power at 638 nm

November 13, 2014

The HL63193MG laser diode from Oclaro is a multi-transverse mode AlGaInP laser diode with TM mode oscillation in a 5.6-mm-diameter TO package.

Spectrometer from APE GmbH offers resolution better than 3 nm

November 13, 2014

The waveScan USB spectrometer performs spectral analysis for CW and mode-locked laser systems in the midinfrared range from 1.5 to 6.3 micron.

Ophir Photonics beam splitters control and adjust beam output power

November 13, 2014

LBS-400 beam splitters measure UV, NIR, or IR wavelength beams with diameters up to 1 in.

Direct drive motors from MotiCont eliminate backlash

November 12, 2014

SDLM-051 direct drive linear motors are available in off-the-shelf models with resolutions of 5.2 and 1.25 µm and submicron resolution.

AFL splice protection sleeves safeguard single fiber slices

November 12, 2014

The FP-03 fiber splice protection sleeves are optical components designed for optical components where small packaging is a priority.

Visible-IR camera from Raptor Photonics detects 400 to 1700 nm wavelengths

November 11, 2014

The OWL 640 M42 is a rugged, high sensitivity digital visible-SWIR camera with an M42 lens mount.

Horiba Scientific releases Raman spectroscopy software

November 11, 2014

The LabSpec 6.3 Raman spectroscopy software platform includes a 3D surface and volume display module.

Power Technology iLLUMINA light source features wavelengths at 405 and 375 nm

November 11, 2014

The iLLUMINA light source for laser-based lithography features fiber-coupled output power up to 37 W.

Motion control unit from HALaser offers command execution time down to 1 microsec

November 11, 2014

The E1701M 4-axis stepper motion controller has 100 Mbit Ethernet and USB 2.0 connections.

Optimet laser sensor designed for 2D and 3D measurements

November 10, 2014

The ConoProbe Mark10-HD non-contact laser sensor is designed for 2D, 3D, surface contour, and volumetric measurements for quality control, inspection, and metrology.

  •  
  •  
  •  
  •  
Copyright © 2007-2015. PennWell Corporation, Tulsa, OK. All Rights Reserved.PRIVACY POLICY | TERMS AND CONDITIONS