Focus on Products


                                                      

Siskiyou's SM-CFTx fiber coupler


Siskiyou's SM-CFTx fiber coupler uses the optical lever arm effect, and a diffraction-limited asphere, to make single mode coupling easier than ever. The basis of this design is our vibration-resistant OTX.5 series multi-axis optics positioner, which can take a 3G jolt without moving. 100 thread per inch (TPI) adjustment screws are used to ensure accurate sub-micron translation. The Y axis knob uses a unique capture screw design to ensure no drift due to overloading in that axis. For added stability, each SM-CFTx motion axis is fitted with a non-influencing axis lock, maintaining alignment in challenging environments.
Siskiyou
Get the full details at
www.Siskiyou.com • (877) 313-6418


New Miniature, Smart, 10W DC to HV DC Converters

0.7V Turn-on Voltage
Over-Temperature Protection with Automatic Shutdown and Error Code
Disable Pin, TTL Compatible High=Off
Inaudible >25kHz Oscillator, Low EMI/RFI
Arc Protection and Short Circuit Protection

EMCO High Voltage Corporation
emcohighvoltage.com

Website: http://emcohighvoltage.com

                                                    


                                              

NEW! Low Noise Quantum Cascade Laser Driver


The QCL Series Low Noise Quantum Cascade Laser Driver's patented circuitry minimizes linewidth, spectral drift, and center wavelength jitter. This OEM controller is available for CW control up to 2 A with low RMS noise (0.7 ?A with the QCL1000) for field-deployed or benchtop applications. The QCL Series is the ideal way to increase your chemical sensor performance. Visit us at Photonics West 2011, South Hall #2200.
All products are backed by unlimited, free technical support.
Wavelength Electronics
51 Evergreen Drive
Bozeman, MT 59715
406-587-4910
sales@teamWavelength.com
www.teamWavelength.com/lfw6

Website: http://www.teamWavelength.com/lfw6


Verdi V: Superior Reliability and Performance for Ti:Sapphire Pumping


Verdi™ is a family of compact all solid-state CW lasers with powers up to 18W at 532 nm. The lasers deliver superior reliability and performance for Ti:Sapphire pumping applications. Verdi is designed to ensure high dependability, which in turn minimizes cost of ownership and guarantees high productivity.
Coherent
Email: Tech.sales@coherent.com • (p) 800-527-3786
Website: www.coherent.com/verdi

Website: http://www.coherent.com/verdi



                                                       

Real-Time M2 Measurements


Ophir-Spiricon, the global leader in precision laser measurement, today announced Photon's ModeScan 1780 for real-time M2 beam propagation measurements. ISO 11146 parameters are measured in real time using a patented technique of 10 simultaneous beam images on a CCD detector array. Measurements are NIST traceable, important for ISO and FDA regulations.
Ophir Spiricon
www.ophiropt.com/laser-measurement • (p) 866-755-5499

Website: http://www.ophiropt.com/laser-measurement


XY Linear Nanopositioners


The ANT95-XY direct-drive, crossed-roller-bearing nanopositioner provides accurate and repeatable nanometer-scale motion in both the X and Y dimensions. Both travel options (25 mm × 25 mm or 50 mm × 50 mm) come with the 60 mm profile height. Performance is exceptional with 1 nm resolution, 50 nm repeatability, 250 nm accuracy, and <1 nm in-position stability. This unique drive and bearing combination, packaged in an extremely small-profile and footprint, offers tangible advantages in many applications such as high-precision positioning, disk-drive fabrication, fiber alignment, optical delay element actuation, sensor testing, and scanning processes that demand smooth and precise motion.
Aerotech, Inc.
www.aerotech.com

Website: http://www.aerotech.com


Ultra-thin Extended Contact Steel Stages


Thin is in! Total stage height only 1cm.

45% thinner and 30% lighter than our standard extended contact steel stages.
Same performance specifications as our standard extended contact steel stages.
New opposed screw locking mechanism.
Available with micrometer actuators or fine pitch screw actuators.

OptoSigma
www.optosigma.com

Website: http://www.optosigma.com


Pulse Selection System


CONOPTICS' PULSE PICKER allows you to select from single shot to 30MHz rep rate for mode locked lasers running as high as 100MHz. Minimal dispersion, compatible with fsec pulses, no spatial dispersion. Optical transmission > 80%. Available for TI: Sapphire and OPO's 700 to 1600nm.
ConOptics, Inc.
19 Eagle Rd., Danbury, CT 06810
(p) 800-748-3349 • www.conoptics.com

Website: http://www.conoptics.com



                                                                   

Beam Four Java Edition


Our latest optical ray tracer offers a collection of the most valuable tools for the optical designer. Because this edition is pure Java, it runs on all popular computers. It has computational support for lenses, mirrors, prisms, gratings, arrays, HOEs, irises of many types, and arrays of lenses and mirrors. It handles a wide variety of surface profiles including torics, polynomials, and Zernikes. Other features are WFE diagnostics and even stereo viewing. Visit our website and try the free download!
Stellar Software
www.stellarsoftware.com

Website: http://www.stellarsoftware.com


Announcing TracePro® 7.0


Lambda's latest release of its award winning illumination and optical software, TracePro 7.0, features an interactive optimizer utility, multi-threaded algorithms for up to 10× faster raytracing, and new assembly and grouping capability. Find out why TracePro users create tomorrow's optical, lighting and illumination designs today. Contact us for a free 30 day trial.
Lambda Research
sales@lambdares.com
http://www.lambdares.com/software_products/tracepro/tracepro/

Website: http://www.lambdares.com/software_products/tracepro/tracepro/


TECHSPEC® Calibration Grade Precision Aspheric Lens


Edmund Optics® TECHSPEC® Calibration Grade Precision Aspheric Lenses provide the ultimate in performance and precision available from off-the-shelf polished aspheric lenses. They provide an impressive aspheric surface accuracy of 0.25 µm RMS. With high numerical apertures of 0.50 and 0.66, they are ideal for improving the efficiency of low light level detection systems or applications requiring a compact optical path. Lenses are in stock and available for immediate delivery.
Edmund Optics Inc.
www.edmundoptics.com

Website: http://www.edmundoptics.com

Laser Focus World 2011 Media Kit