Shaping broadband beams with diffractive optics: What is best?

Sept. 30, 2014
Researchers at the University of Eastern Finland have broadly theoretically examined the use of different optical elements used for spatially shaping spatially coherent but broadband light beams, either continuous-wave (CW) or pulsed; such light sources include, for example, superluminescent LEDs (SLEDs).

Researchers at the University of Eastern Finland (Joensuu, Finland) have broadly theoretically examined the use of different optical elements used for spatially shaping spatially coherent but broadband light beams, either continuous-wave (CW) or pulsed; such light sources include, for example, superluminescent LEDs (SLEDs). The researchers considered diffractive optics of different forms including standard first-order diffractive elements and harmonic diffractive optical elements (which have a phase change of M2π between diffractive zones where M is greater than 1). In particular, they examined the use of such optics for the very important case where a Gaussian beam is transformed into some other shape (for example, flat-top) that is more desirable for the task at hand. They examined broadband spectral rages from relatively small (tens of nanometers) to large (the entire visible spectrum). Their examination included Fourier- and Fresnel-domain beam planes.

Based on beam-propagation equations, they came up with a number of practical conclusions. First, if the spectrum is reasonably narrow (no more than tens of nanometers) and symmetric about its central frequency, then standard diffractive beam shaping elements work well. Examples covered by this case include beams produced by many pulsed femtosecond lasers, as well as by SLEDs. When examining very broadband light (for example, that produced by supercontinuum sources), the researchers determined that the use of low-harmonic diffractive elements with M greater than 4 were preferable, for one because they did not interfere much with the color distribution (behaving similarly to refractive optical elements). In contrast, when shaping a very broadband beam into a flat-top shape, standard diffractive beam shaping elements (M=1) produced widely varying colors across the flat-top. Contact Manisha Singh at [email protected].

Sponsored Recommendations

Understanding 3D Printing Tolerances: A Guide to Achieving Precision in Additive Manufacturing

March 28, 2024
In the world of additive manufacturing, precision is paramount. One crucial aspect of ensuring precision in 3D printing is understanding tolerances. In this article, we’ll explore...

Horizon Microtechnologies: Coating 3D Printed Parts with Functional Materials

March 28, 2024
Andreas Frölich from Horizon Microtechnologies talks innovations in 3D micro-parts printing with functional materials for various industries.

Melles Griot® XPLAN™ CCG Lens Series

March 19, 2024
IDEX Health & Science sets a new standard with our Melles Griot® XPLAN™ CCG Lens Series fluorescence microscope imaging systems. Access superior-quality optics with off-the-shelf...

Spatial Biology

March 19, 2024
Spatial Biology refers to the field that integrates spatial information into biological research, allowing for the study of biological systems in their native spatial context....

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!