Optical metamaterial design has a negative refractive index over a 552 nm range

May 1, 2014
"Fishnet" 2D metamaterials, which have arrays of identical apertures that perforate a structure consisting of thin-film metal layers alternating with dielectric layers, can have a negative refractive index (NRI) at visible and near-IR wavelengths.

"Fishnet" 2D metamaterials, which have arrays of identical apertures that perforate a structure consisting of thin-film metal layers alternating with dielectric layers, can have a negative refractive index (NRI) at visible and near-IR wavelengths. In the interests of broadening the NRI bandwidth from previous ranges, researchers at RMIT University (Melbourne, Australia) and the University of Sydney (Sydney, Australia) have been experimenting with apertures having complex shapes, including six- and eight-point stars, derived from an evolutionary algorithm. Their theoretical study of fishnet structures with a square unit cell 300 nm in size results in detailed information about the wavelength ranges over which the metamaterials have a double negative refractive index (DNRI), where both permeability and permittivity are negative, and the NRI, over which either the permeability or permittivity is negative.

The metamaterial with the best performance, which has apertures consisting of almost circular 16-sided stars, has a continuous NRI bandwidth of 552 nm, or the band including wavelengths from 640 to 1192 nm. (The NRIs of pre-existing fishnet metamaterial designs have usually maxed out at around 100 nm.) This same structure with the 16-sided stars has a DNRI of 106 nm (a large DNRI is more difficult to achieve, but is more attractive because the resulting metamaterials have lower optical loss). Other star-aperture-based metamaterials have both continuous NRI and DNRI bands in the yellow and green visible regions.

Contact Shiwei Zhou at [email protected].

Sponsored Recommendations

Request a quote: Micro 3D Printed Part or microArch micro-precision 3D printers

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.

How to Tune Servo Systems: The Basics

April 10, 2024
Learn how to tune a servo system using frequency-based tools to meet system specifications by watching our webinar!

Precision Motion Control for Sample Manipulation in Ultra-High Resolution Tomography

April 10, 2024
Learn the critical items that designers and engineers must consider when attempting to achieve reliable ultra-high resolution tomography results here!

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!