Forced airflow efficiently cools high-power beam-combining VBGs

Jan. 13, 2014
Volume Bragg gratings (VBGs), which are recorded as refractive-index variations in photothermorefractive (PTR) glass, can be used for high-power, high-spectral-density laser beam combining.

Volume Bragg gratings (VBGs), which are recorded as refractive-index variations in photothermorefractive (PTR) glass, can be used for high-power, high-spectral-density laser beam combining. However, the high powers cause heating of the VBG, as well as the copper holder for the VBG, leading to thermal deformation of the VBG, reduced efficiency, and beam degradation. Minimizing these effects requires careful mechanical and heat-flow design.

To model such a system, which requires the ability to model heat flow, airflow, and geometry, researchers at the College of Optics and Photonics (CREOL; Orlando, FL) and OptiGrate (Oviedo, FL) turned to multiphysics software produced by COMSOL (Burlington, MA). The model was created to closely imitate the characteristics of VBG experimental setups at CREOL. In the case of a freestanding VBG, four experimental laser-beam powers of 4.5, 6.7, 8.9, and 11 kW were modeled; in the case of a VBG placed between two glass plates (with airflow between them), beam powers of 4.5, 6.1, 6.7, 8.9, and 11 kW were used. Airflows varying between 0 and 121 m/s were also included in the model. The simulation results matched experimental temperatures of both systems with sufficient precision, and provided extra information that the experiments could not provide. Results showed that forced-air cooling of a VBG works well, especially with the addition of the glass plates. Contact Sergiy Kaim at [email protected].

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

Request a quote: Micro 3D Printed Part or microArch micro-precision 3D printers

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.

How to Tune Servo Systems: The Basics

April 10, 2024
Learn how to tune a servo system using frequency-based tools to meet system specifications by watching our webinar!

Precision Motion Control for Sample Manipulation in Ultra-High Resolution Tomography

April 10, 2024
Learn the critical items that designers and engineers must consider when attempting to achieve reliable ultra-high resolution tomography results here!

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!