SiN CMOS-compatible integrated photonics aim at visible wavelengths

Sept. 5, 2013
Researchers at Aachen University and Illumina have solved three problems that inhibited use of silicon nitride for integrated photonics at visible wavelengths.

Silicon nitride (SiN) has a high refractive index compared to silicon dioxide (SiO2), which leads to tight confinement in SiO2-clad SiN waveguides; SiN is also compatible with standard complementary-metal-oxide semiconductor (CMOS) technology. These facts, and others, make SiN promising as a replacement for silicon in integrated photonics for some uses. Researchers at Aachen University (Aachen, Germany) and Illumina (Hayward, CA) have solved three problems that inhibited use of SiN for integrated photonics at visible
wavelengths.

First, they created waveguides with an ultrathin (100 nm) film layer that boosts the interaction of the light field with the top cladding (important for sensing applications). Second, they created a free-space coupler for visible wavelengths (660 nm in the prototype) with an insertion efficiency in the range 38% to 44%. Third, they developed a multimode interference coupler (MMI) for splitting light within the circuit; the 57.3-μm-long MMI split one beam into four with an efficiency higher than 93% and an imbalance less than 10%. Waveguide losses were below 0.71 dB/cm and 0.51 dB/cm with water cladding and SiO2 cladding, respectively, and bend losses for various radii were low—for example, 0.02 dB per 90° bend for a 55 μm radius. Potential uses include biosensing in the visible and near-IR regions. Contact Sebastian Romero-García at[email protected].

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

Request a quote: Micro 3D Printed Part or microArch micro-precision 3D printers

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.

How to Tune Servo Systems: The Basics

April 10, 2024
Learn how to tune a servo system using frequency-based tools to meet system specifications by watching our webinar!

Precision Motion Control for Sample Manipulation in Ultra-High Resolution Tomography

April 10, 2024
Learn the critical items that designers and engineers must consider when attempting to achieve reliable ultra-high resolution tomography results here!

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!