Scottish scientists reduce speed of light in free space

Jan. 26, 2015
Although the speed of light can be slowed slightly as it travels through materials such as water or glass, it was until now thought impossible for photons to be slowed as they travel through free space.

Although the speed of light can be slowed slightly as it travels through materials such as water or glass, it was until now thought impossible for photons to be slowed as they travel through free space. Now, in a Science Express paper, researchers from the University of Glasgow (Glasgow, Scotland) and Heriot-Watt University (Edinburgh, Scotland) describe how they have managed to slow photons in free space for the first time. They have demonstrated that applying a mask to an optical beam to give photons a spatial structure can reduce their speed.

RELATED ARTICLE: THB in emerald slows light to 16 km/s

Their experiment was configured like a race, with two photons released simultaneously across identical distances towards a defined finish line (see figure). The team compare a beam of light, containing many photons, to a team of cyclists who share the work by taking it in turns to cycle at the front. Although the group travels along the road as a unit, the speed of individual cyclists can vary as they swap position.

The group formation can make it difficult to define a single velocity for all cyclists, and the same applies to light. A single pulse of light contains many photons, and scientists know that light pulses are characterized by a number of different velocities. The researchers found that one photon reached the finish line as predicted, but the structured photon which had been reshaped by the mask arrived later, meaning it was traveling more slowly in free space. Over a distance of one meter, the team measured a slowing of up to 20 wavelengths, many times greater than the measurement precision.

The work demonstrates that, after passing the light beam through a mask, photons move more slowly through space. Crucially, this is very different to the slowing effect of passing light through a medium such as glass or water, where the light is only slowed during the time it is passing through the materialit returns to the speed of light after it comes out the other side. The effect of passing the light through the mask is to limit the top speed at which the photons can travel.

The work was carried out by a team from the University of Glasgow’s Optics Group, led by professor Miles Padgett, working with theoretical physicists led by Stephen Barnett, and in partnership with Daniele Faccio from Heriot-Watt University.

Daniel Giovannini, one of the lead authors of the paper, said, "The delay we've introduced to the structured beam is small, measured at several micrometres over a propagation distance of one metre, but it is significant. We’ve measured similar effects in two different types of beams known as Bessel beams and Gaussian beams."

Co-lead author Jacquiline Romero said, "We've achieved this slowing effect with some subtle but widely-known optical principles. This finding shows unambiguously that the propagation of light can be slowed below the commonly accepted figure of 299,792,458 metres per second, even when travelling in air or vacuum."

Padgett adds, "The results give us a new way to think about the properties of light and we’re keen to continue exploring the potential of this discovery in future applications. We expect that the effect will be applicable to any wave theory, so a similar slowing could well be created in sound waves, for example."

SOURCE: University of Glasgow; http://www.gla.ac.uk/news/headline_388852_en.html

About the Author

Gail Overton | Senior Editor (2004-2020)

Gail has more than 30 years of engineering, marketing, product management, and editorial experience in the photonics and optical communications industry. Before joining the staff at Laser Focus World in 2004, she held many product management and product marketing roles in the fiber-optics industry, most notably at Hughes (El Segundo, CA), GTE Labs (Waltham, MA), Corning (Corning, NY), Photon Kinetics (Beaverton, OR), and Newport Corporation (Irvine, CA). During her marketing career, Gail published articles in WDM Solutions and Sensors magazine and traveled internationally to conduct product and sales training. Gail received her BS degree in physics, with an emphasis in optics, from San Diego State University in San Diego, CA in May 1986.

Sponsored Recommendations

Request a quote: Micro 3D Printed Part or microArch micro-precision 3D printers

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.

How to Tune Servo Systems: The Basics

April 10, 2024
Learn how to tune a servo system using frequency-based tools to meet system specifications by watching our webinar!

Precision Motion Control for Sample Manipulation in Ultra-High Resolution Tomography

April 10, 2024
Learn the critical items that designers and engineers must consider when attempting to achieve reliable ultra-high resolution tomography results here!

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!