Photon Systems Deep-UV NeCu laser to power Mars 2020 Raman fluorescence instrument

Aug. 11, 2014
A narrow-linewidth, deep-UV laser developed by Photon Systems is at the heart of the Scanning Habitable Environments with Raman & Luminescence for Organics & Chemicals (SHERLOC) instrument that was selected by NASA for the Mars 2020 rover arm.

A narrow-linewidth, deep-UV laser developed by Photon Systems (Covina, CA) is at the heart of Scanning Habitable Environments with Raman & Luminescence for Organics & Chemicals (SHERLOC) instrument that was selected by NASA for the Mars 2020 rover arm. SHERLOC is a deep-UV fluorescence/Raman instrument that enables spatial mapping of fluorescence emissions and Raman scatter of organics and astrobiologically relevant minerals on abraded surfaces and boreholes created by the rover coring system.

RELATED ARTICLE: 1064 nm Raman filters from Iridian reduce fluorescence interference

The Photon Systems 400 gram neon-copper (NeCu) laser provides excitation at 248.6 nm with a linewidth less than 0.5 pm. Its sub-250 nm excitation is key to enabling simultaneous detection of Raman and fluorescence emissions. The Photon Systems NeCu laser turns on instantly without the need for preheating, warm-up, or temperature regulation at ambient temperatures in a range from minus 135 to plus 70 degrees Celsius. The laser has been tested over these temperature extremes as well as at three times the shock and vibration limits imposed for similar Mars missions without failure. Photon Systems says these lasers have previously been vetted on many expeditions to harsh environments on Earth such as Antarctica, the Arctic, and the deep Ocean.

SOURCE: Photon Systems; http://www.photonsystems.com/downloads/sherloc_jpl.pdf

Sponsored Recommendations

Understanding 3D Printing Tolerances: A Guide to Achieving Precision in Additive Manufacturing

March 28, 2024
In the world of additive manufacturing, precision is paramount. One crucial aspect of ensuring precision in 3D printing is understanding tolerances. In this article, we’ll explore...

Horizon Microtechnologies: Coating 3D Printed Parts with Functional Materials

March 28, 2024
Andreas Frölich from Horizon Microtechnologies talks innovations in 3D micro-parts printing with functional materials for various industries.

Melles Griot® XPLAN™ CCG Lens Series

March 19, 2024
IDEX Health & Science sets a new standard with our Melles Griot® XPLAN™ CCG Lens Series fluorescence microscope imaging systems. Access superior-quality optics with off-the-shelf...

Spatial Biology

March 19, 2024
Spatial Biology refers to the field that integrates spatial information into biological research, allowing for the study of biological systems in their native spatial context....

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!