Laser 'lightning-rod' setup improved by addition of nanosecond laser

Aug. 19, 2014
Earlier this year, researchers at the University of Arizona (UA; Tucson, AZ) and the University of Central Florida (UCF; Orlando, FL) created a dual-femtosecond-laser-beam setup that channels plasma filaments and could divert lightning strikes; now, the UA team, along with a researcher at Phillipps-Universität Marburg (Marburg, Germany), have augmented such a setup with a laser producing much longer (nanosecond-range) pulses that continue to heat the plasma, reducing the breakdown of the electrical field by up to a factor of four.
A femtosecond laser creates a thin column of plasma in the air between two electrodes. (Photo by Pavel Polynkin)

Earlier this year, researchers at the University of Arizona (UA; Tucson, AZ) and the University of Central Florida (UCF; Orlando, FL) created a dual-femtosecond-laser-beam setup that channels plasma filaments and could divert lightning strikes; now, the UA team, along with a researcher at Phillipps-Universität Marburg (Marburg, Germany), have augmented such a setup with a laser producing much longer (nanosecond-range) pulses that continue to heat the plasma, reducing the breakdown of the electrical field by up to a factor of four.1

The nanosecond laser replaces one of the femotsecond lasers in the earlier setup. As in the previous research, the new technique can potentially direct an electrical discharge up to 10 m away or more. One potential use is the remote detonation of land mines.

Superheating required
The researcher were aided by understanding how the atmosphere behaves when it was subjected to these extremely energetic light pulses (the femtosecond "igniter" pulse and the nanosecond "heater" pulse). They recognized that it wasn't the actual plasma created by the lasers that made the atmosphere more conductive; it was the subsequent superheating that lowered the density of the filament of air. Without some additional input of energy, however, this zone of lower density quickly collapsed. To improve both distance and duration, a second energy source was needed to rapidly reheat the air, stabilizing the filament just long enough to carry an electrical current.

Based on their initial results, the researchers believe that other forms of heater beams, such as microwaves or long-wavelength lasers, could further increase the distances they were able to achieve, though other issues would need to be addressed before applications like channeling lightning could be achieved.

As a next step, the researchers are planning on using a microwave beam in place of the nanosecond laser to more efficiently heat the channel and perhaps achieve better results.

Source: http://uanews.org/story/laser-lightning-rods-channel-electricity-through-thin-air

REFERENCE:

1. Maik Scheller et al., Optica (2014); http://dx.doi.org/10.1364/OPTICA.1.000125

Sponsored Recommendations

Request a quote: Micro 3D Printed Part or microArch micro-precision 3D printers

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.

How to Tune Servo Systems: The Basics

April 10, 2024
Learn how to tune a servo system using frequency-based tools to meet system specifications by watching our webinar!

Precision Motion Control for Sample Manipulation in Ultra-High Resolution Tomography

April 10, 2024
Learn the critical items that designers and engineers must consider when attempting to achieve reliable ultra-high resolution tomography results here!

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!