Coated suspended-core fiber detects trace amounts of explosives

May 9, 2014
n Australian-led group of researchers has enhanced a suspended core microstructured optical fiber with a conjugated-polymer coating to allow sensitive detection of explosives in a liquid volume within the fiber.

An Australian-led group of researchers has enhanced a suspended core microstructured optical fiber with a conjugated-polymer coating to allow sensitive detection of explosives in a liquid volume within the fiber.1 For example, when testing for 1,4-dinitrobenzene (DNB), which is a nitroaromatic explosive, the setup identifies the substance within a few minutes at concentrations as low as 6.3 parts per million (ppm) in a total sampling volume of 27 nl of acetone.

The technique is based on fluorescence quenching of the surface-attached conjugated polymer, which is poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV); the red fluorescence is stimulated by green laser light. The small size of the fiber's core (which is spatially suspended by three links) enables the strong evanescent-field interactions needed for sensing.

The team consists of scientists from the University of Adelaide (Adelaide, Australia), the Defence Science & Technology Organisation (DTSO; Edinburgh, Australia), and Shanghai University of Electric Power (Shanghai, China).

"Traditionally, explosives detection has involved looking for metals that encase them such as in land mines," says project leader Georgios Tsiminis, from the University of Adelaide's Institute for Photonics and Advanced Sensing. "In today's world, however, homemade improvised explosive devices will often have no metal in them so we need to be able to detect the explosive material itself. This can be difficult as they often don't interact with chemicals and we don't want them near electricity in case they explode."

In addition to sensing the presence of an explosive, the fiber-based device quantifies the amount of explosive by monitoring how the light emission changes over time, says Tsiminis. Because the technique is so sensitive, forensic investigators would simply take swabbed samples from various surfaces, place them in an organic solvent and, within a few minutes, know if there have been explosives present.

Source: http://www.adelaide.edu.au/news/news70403.html

REFERENCE:

1. Fenghong Chu et al., Sensors and Actuators B: Chemical, Vol. 199, p. 22 (2014); dx.doi.org/10.1016/j.snb.2014.03.031

Sponsored Recommendations

Understanding 3D Printing Tolerances: A Guide to Achieving Precision in Additive Manufacturing

March 28, 2024
In the world of additive manufacturing, precision is paramount. One crucial aspect of ensuring precision in 3D printing is understanding tolerances. In this article, we’ll explore...

Horizon Microtechnologies: Coating 3D Printed Parts with Functional Materials

March 28, 2024
Andreas Frölich from Horizon Microtechnologies talks innovations in 3D micro-parts printing with functional materials for various industries.

Melles Griot® XPLAN™ CCG Lens Series

March 19, 2024
IDEX Health & Science sets a new standard with our Melles Griot® XPLAN™ CCG Lens Series fluorescence microscope imaging systems. Access superior-quality optics with off-the-shelf...

Spatial Biology

March 19, 2024
Spatial Biology refers to the field that integrates spatial information into biological research, allowing for the study of biological systems in their native spatial context....

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!