SWIR detector from Xenics for high-resolution spectroscopy

March 7, 2012
The XFPA-1.7-640-LN2 is a liquid nitrogen-(LN2) cooled SWIR detector.
Xenics XFPA-1.7-640-LN2 SWIR detector
Xenics XFPA-1.7-640-LN2 SWIR detector
Xenics XFPA-1.7-640-LN2 SWIR detector
Xenics XFPA-1.7-640-LN2 SWIR detector
Xenics XFPA-1.7-640-LN2 SWIR detector
Xenics XFPA-1.7-640-LN2 SWIR detector
The XFPA-1.7-640-LN2 is a liquid nitrogen-(LN2) cooled SWIR detector. It was developed for R&D spectroscopy and photon emission in the semiconductor failure analysis industry, high-resolution spectroscopy, and low-light-level SWIR and VIS/NIR imaging. It has a resolution of 640 × 512 pixels with a pixel pitch of 20 μm, noise <20 e-, and dark current of <5 e-/s per pixel.Xenics
Leuven, Belgium
www.xenics.comMore Products ----- PRESS RELEASE Xenics Launches Lowest Noise SWIR Detector XFPA-1.7-640-LN2 and Ultra-Short Integration Time Bobcat-320-Gated Leuven, Belgium / Boston, Mass - 16 January 2012 --- Xenics, Europe's leading developer and manufacturer of advanced infrared detectors and customized imaging solutions from the LWIR into the visible realm, introduces a host of advanced SWIR cameras for medical, scientific and industrial markets. A new detector, the XFPA-1.7-640-LN2, is geared to very demanding low-signal-level measurements in semiconductor inspection and fault localization. Bobcat-320-Gated, a new camera for scientific R&D applications, delivers extremely short integration times of 80 nsec. Lynx high speed SWIR line-scan series offers highest resolution of up to 1 x 2048 for non-intrusive medical imaging and general SWIR applications, whereas Gobi-640-GigE addresses the lower-cost LWIR thermal imaging segment. Xenics demonstrates its product range in Booths 8216 (BiOS) and 4831 (Photonics West). Xenics at BiOS 2012 High-speed SWIR and advanced thermal imaging for non-intrusive medical applications are the focus of Xenics' BiOS 2012 presentation. Targeted are bio-medical technology providers of optical coherence tomography (OCT), molecular imaging, and spectroscopy solutions. Among Xenics' new camera releases for the medical market is the Lynx, with the new model offering a unique achievement in resolution of up to 1 x 2048 pixels. This is an outstanding value in the SWIR line-scan camera market. It enables the user to increase resolution by a factor of two compared to others offering 1024 pixels. Lynx-1.7-2048 offers low noise at a high line rate of 10 kHz; Lynx-1.7-1024 and Lynx-1.7-512 even offers up to 40 kHz line rate, which enables the capture of fast moving samples. Lynx is equipped with the smallest available sensor having a pixel pitch of 12.5 μm to support inspection tasks that demand ever higher accuracy in the SWIR range. A special benefit for medical imaging applications in the SWIR realm, such as OCT, is that the light source radiates at a wavelength of 1.3 μm, which increases the penetration depth in human tissue. Lynx is compatible with the C-Mount standard. Another new product release, Gobi-640-GigE, addresses lower-cost, high-sensitivity medical imaging in a small form factor with 640 x 480 pixels. The camera includes a compact GigE interface, on-board image processing and Power over Ethernet (PoE). The new model offers unparalleled ease of integration via GigE Vision, as well as utmost flexibility through PoE. The Xenics Gobi series is excellently well suited for life tissue imaging and breast cancer examination. Xenics at Photonics West 2012 Xenics' new-product presentation builds on highly advanced SWIR cameras and detectors for demanding low-light-level applications and gated imaging. Photonics West 2012 will see the introduction of a high-resolution liquid-nitrogen- (LN2) cooled SWIR detector, the XFPA-1.7-640-LN2. It was specifically developed for R&D spectroscopy and photon emission in the semiconductor failure analysis industry, high-resolution spectroscopy and low-light-level SWIR and VisNIR imaging. The new detector XFPA-1.7-640-LN2, based on source-follower detector (SFD) read-out technology, offers high sensitivity at a resolution of 640 x 512 pixels with a pixel pitch of 20 μm and reaches extreme long integration times. LN2-cooling at 77K allows for lowest noise (< 20 e-) ever seen for SWIR detectors and low dark current (< 5 e-/sec per pixel). Optionally, the measurement realm can be extended into the visible spectrum. Easy focusing on the microscope stage is supported by the increased frame rate in windowing mode. Based on this new XFPA detector, Xenics will introduce a complete camera system, the "Cougar", in the second half of 2012. Another highlight at the Xenics booth is Bobcat-320-Gated, an SWIR camera operating in the 0.85 to 1.6 μm spectral band. It provides extremely short integration times down to 80 nsec. Bobcat-320-Gated makes use of a highly sensitive uncooled InGaAs detector, which is available in a 20μm pixel-pitch. The compact camera contains real-time on-board image processing and image correction – all at a very favorable price point. A special feature of Bobcat-320-Gated is the programmable trigger-out delay between the internally generated trigger-out pulse and the start of integration. It is configurable from 80 nsec up to 2 msec in steps of 80 nsec. Bobcat-320-Gated captures frames at a frame rate tunable around 28 fps. With all these features, Bobcat-320-Gated is ideally suited for the inspection of hot and fast moving objects or measurement systems requiring synchronization of the camera with a pulsed laser. "Our main message," says Xenics founder and CEO Bob Grietens, "is that Xenics covers the entire wavelength span from SWIR over MWIR to LWIR with advanced thermography systems. For medical applications such as OCT, our new high-speed SWIR cameras are the perfect fit. In the scientific markets, our new Bobcat-320-Gated takes the lead by providing very short integration times." About Xenics Xenics is the leading developer of innovative infrared detection solutions for a wide range of applications. Xenics designs, manufactures and sells infrared detectors and cameras, both line-scan and 2-D, covering the infrared wavelength ranges from 0.4 to 14 micrometers. In addition, Xenics delivers custom products according to the agreed specification and planning. As a European vendor with a worldwide service and distributor network, Xenics is strategically placed to serve global markets with highly innovative products drawing on a strong science and technology background. -----Follow us on TwitterSubscribe now to Laser Focus World magazine; it's free!
About the Author

LFW Staff

Published since 1965, Laser Focus World—a brand and magazine for engineers, researchers, scientists, and technical professionals—provides comprehensive global coverage of optoelectronic technologies, applications, and markets. With 80,000+ qualified print subscribers in print and over a half-million annual visitors to our online content, we are the go-to source to access decision makers and stay in-the-know.

Sponsored Recommendations

Melles Griot® XPLAN™ CCG Lens Series

March 19, 2024
IDEX Health & Science sets a new standard with our Melles Griot® XPLAN™ CCG Lens Series fluorescence microscope imaging systems. Access superior-quality optics with off-the-shelf...

Spatial Biology

March 19, 2024
Spatial Biology refers to the field that integrates spatial information into biological research, allowing for the study of biological systems in their native spatial context....

Custom-Engineered Optical Solutions for Your Application

March 19, 2024
We combine advanced optical design and manufacturing technology, with decades of experience in critical applications, to take you from first designs to ongoing marketplace success...

Semrock Optical Filters Resources

March 19, 2024
Looking for more information about Semrock optical filters? Explore sets by fluorophore, download the 2023 Semrock catalog and more.

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!