The PInano series super-resolution microscope stages include 200 µm XY and XYZ models with direct-measuring capacitive sensors or piezoresistive sensors. A large aperture accommodates microscopy accessories such as slide holders and Petri dish holders; a recessed bottom slide mount allows full turret rotation without in-and-out Z-motion; and a 20 mm design facilitates integration into inverted microscopes. Additional features include a 24 bit controller with USB, Ethernet, RS-232 interface, and analog control, as well as closed-loop control for sub-nanometer precision.
PI (Physik Instrumente)
Auburn, MA
[email protected]
More Products
-----
PI PRESS RELEASE
SR Microscope Stages are More Stable with Capacitive Feedback
Auburn, MA – PI (Physik Instrumente) LP has added two higher-performance models to its successful PInano™ superresolution (SR) microscope stage series.
Higher Stability and Reduced Noise with Capacitive Sensors, Lower Cost Piezoresistive Models Still Available
The new models are equipped with direct-measuring capacitive sensors. This type of sensor can provide higher linearity and long term stability than the lower cost piezoresistive sensor-equipped stages which are still available. Capacitive sensors are also less sensitive to noise due to a high-frequency measurement principle as opposed to the DC-based sensing technique used in piezoresistive sensors. The net effect is similar to the higher quality and lower noise on FM radio channels compared to AM radio.
Bottom Mount Slide Allows Full Turret Rotation, Protects Objectives
The large aperture accommodates microscopy accessories such as slide holders, Petri dish holders, etc. The recessed bottom slide mount allows full rotation of the turret without in and out Z-motion, protecting valuable objectives from crashing into the stage on turret rotation.
XY and XYZ Models, 200µm Travel / Axis
Both XY and XYZ stages are available. The low profile design of 20 mm (0.8”) facilitates the integration into inverted microscopes from the four major manufacturers Leica, Nikon, Olympus and Zeiss.
Optional Long-Travel Motorized Microscope Stage
An optional 25x25 mm positioning stage with self-clamping ultrasonic ceramic motors serves as a stable basis for the piezo scanning stage and allows imaging of large samples.
Image Acquisition Software
The microscope stages are compatible with all major image acquisition software packages such as Micromanager™, Metamorph™, etc.
Features & Advantages
Sensor Choice: High Stability Capacitive or Lower Cost Piezoresistive Sensors
24 Bit Controller with USB, Ethernet, RS-232 Interface and Analog Control
200 µm XY or XYZ Travel, Closed-Loop Control for Sub-Nanometer Precision
Bottom Slide Mount for Full Turret Rotation facilitates Integration
Many Options: Slide Holders & Petri dish Holders; Motor XY Stage, Manual Stage
Longer Lifetime due to Ceramic Encapsulated Piezo Drives
Software Support for Leading Image Acquisition Packages
Datasheets & More Information:
http://www.nanopositioning.net/XYZ_nanopositioning_stage.php?#nano
-----
Follow us on Twitter
Subscribe now to Laser Focus World magazine; it's free!