Caltech uses laser light to cool object to quantum ground state

Oct. 7, 2011
Pasadena, CA--Caltech researchers collaborating with the University of Vienna have cooled a miniature mechanical object to its quantum ground state using laser light.

Pasadena, CA--California Institute of Technology (Caltech) researchers, in collaboration with a team from the University of Vienna (Vienna, Austria), have, for the first time, cooled a miniature mechanical object to its lowest possible energy state--its quantum ground state--using laser light. Objects have been cooled to the ground state using conventional refrigeration and microwaves, but this is the first demonstration that uses laser light. The achievement paves the way for the development of highly sensitive detectors as well as for new quantum experiments.

"We've taken a solid mechanical system--one made up of billions of atoms--and used optical light to put it into a state in which it behaves according to the laws of quantum mechanics. In the past, this has only been achieved with trapped single atoms or ions," says Oskar Painter, professor of applied physics and executive officer for applied physics and materials science at Caltech and the principal investigator on a paper in the October 6 issue of Nature.

The team engineered a nanoscale object--a tiny mechanical silicon beam--such that laser light of a carefully selected frequency can enter the system and, once reflected, can carry thermal energy away, cooling the system. By carefully designing each element of the beam as well as a patterned silicon shield that isolates it from the environment, Painter and colleagues were able to use the laser cooling technique to bring the system down to the quantum ground state, where mechanical vibrations are at an absolute minimum. Such a cold mechanical object could help detect very small forces or masses, whose presence would normally be masked by the noisy thermal vibrations of the sensor.

To reach the ground state, Painter's group had to cool its mechanical beam to a temperature below 100 millikelvin (-273.15 degrees C). That's because the beam is designed to vibrate at gigahertz frequencies (corresponding to a billion cycles per second)--a range where a large number of phonons are present at room temperature. Phonons are the most basic units of vibration just as the most basic units or packets of light are called photons. All of the phonons in a system have to be removed to cool it to the ground state.

"What we've done is used the photons--the light field--to extract phonons from the system," says Jasper Chan, lead author of the new paper and a graduate student in Painter's group. To do so, the researchers drilled tiny holes at precise locations in their mechanical beam so that when they directed laser light of a particular frequency down the length of the beam, the holes acted as mirrors, trapping the light in a cavity and causing it to interact strongly with the mechanical vibrations of the beam.

Because a shift in the frequency of the light is directly related to the thermal motion of the mechanical object, the light--when it eventually escapes from the cavity--also carries with it information about the mechanical system, such as the motion and temperature of the beam. Thus, the researchers have created an efficient optical interface to a mechanical element--or an optomechanical transducer--that can convert information from the mechanical system into photons of light.

SOURCE: Caltech; http://mr.caltech.edu/press_releases/13459

Subscribe now to Laser Focus World magazine; It’s free!

Follow us on Twitter

IMAGE: An SEM image (a) shows the nanoscale silicon mechanical resonator used in the laser cooling experiment. The central beam region (b) forms an optical cavity where laser light is used to cool the mechanical motion of the beam. Numerical simulations show the localized optical field (c) and the mechanical breathing motion (d) of the nanobeam. (Courtesy Caltech)

Sponsored Recommendations

Understanding 3D Printing Tolerances: A Guide to Achieving Precision in Additive Manufacturing

March 28, 2024
In the world of additive manufacturing, precision is paramount. One crucial aspect of ensuring precision in 3D printing is understanding tolerances. In this article, we’ll explore...

Horizon Microtechnologies: Coating 3D Printed Parts with Functional Materials

March 28, 2024
Andreas Frölich from Horizon Microtechnologies talks innovations in 3D micro-parts printing with functional materials for various industries.

Melles Griot® XPLAN™ CCG Lens Series

March 19, 2024
IDEX Health & Science sets a new standard with our Melles Griot® XPLAN™ CCG Lens Series fluorescence microscope imaging systems. Access superior-quality optics with off-the-shelf...

Spatial Biology

March 19, 2024
Spatial Biology refers to the field that integrates spatial information into biological research, allowing for the study of biological systems in their native spatial context....

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!