Simple modification to ToF lidar data acquisition cancels harmonic error

Dec. 11, 2015
Homodyne amplitude modulated continuous wave (AMCW) lidar is a camera-based time-of-flight (ToF) distance-measurement technique that captures data at every pixel in a scene.
Content Dam Lfw Print Articles 2015 12 1512lfw Nb 4
Content Dam Lfw Print Articles 2015 12 1512lfw Nb 4
Content Dam Lfw Print Articles 2015 12 1512lfw Nb 4
Content Dam Lfw Print Articles 2015 12 1512lfw Nb 4
Content Dam Lfw Print Articles 2015 12 1512lfw Nb 4

Homodyne amplitude modulated continuous wave (AMCW) lidar is a camera-based time-of-flight (ToF) distance-measurement technique that captures data at every pixel in a scene. However, systemic errors can be introduced in AMCW ToF by the digital hardware that is involved in acquiring the data. It turns out that the hardware modulating the light source and the sensor can introduce unwanted harmonic content into the signal, distorting it. While various approaches have been devised to combat this problem, they all have their own disadvantages, such as induced random noise or greater complexity. Now, Lee Streeter and Adrian Dorrington of the University of Waikato (Hamilton, New Zealand) have come up with a simple technique to cancel the harmonic error by modifying the data-acquisition procedure. The technique renders the data acquisition invariant to at least one harmonic (with the third harmonic being chosen, as it is the main source of error).

The light source and sensor are modulated at the same rate and with a programmable offset that is changed to measure different distances. Modulating by turning the source and sensor on and off produces square-wave modulation; the frequency content of square-wave modulation consists of the fundamental plus odd-order harmonics, with the third order greatest in amplitude. The change in the four-phase step measurement is based on relaxing the constraint that the phase steps are evenly spaced. The researchers tested their approach via simulation, comparing it to the traditional four-even-phase step AMCW range measurement, and found that it did indeed reject the third harmonic (STD = standard deviation; angles in radians). They note that, with further measurements, higher-order harmonics can also be rejected. Reference: L. Streeter and A. A. Dorrington, Opt. Lett. (2015); http://dx.doi.org/10.1364/OL.40.005391.

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

How Precision Motion Systems are Shaping the Future of Semiconductor Manufacturing

March 28, 2024
This article highlights the pivotal role precision motion systems play in supporting the latest semiconductor manufacturing trends.

Understanding 3D Printing Tolerances: A Guide to Achieving Precision in Additive Manufacturing

March 28, 2024
In the world of additive manufacturing, precision is paramount. One crucial aspect of ensuring precision in 3D printing is understanding tolerances. In this article, we’ll explore...

Automation Technologies to Scale PIC Testing from Lab to Fab

March 28, 2024
This webinar will cover the basics of precision motion systems for PIC testing and discuss the ways motion solutions can be specifically designed to address the production-scale...

Case Study: Medical Tube Laser Processing

March 28, 2024
To enhance their cardiovascular stent’s precision, optimize throughput and elevate part quality, a renowned manufacturer of medical products embarked on a mission to fabricate...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!