Atomic inner-shell laser produces high-coherence photons at 1.5 A wavelength

Oct. 13, 2015
An atomic inner-shell laser that produces a stable, high-quality hard-x-ray beam at a 1.5 angstrom wavelength has been reported.

An atomic inner-shell laser that produces a stable, high-quality hard-x-ray beam at a 1.5 Å wavelength has been reported by a team of researchers from the University of Electro-Communications (Tokyo, Japan), RIKEN, (Hyogo, Japan), the Japan Synchrotron Radiation Research Institute (Hyogo, Japan), Osaka University (Osaka, Japan), the University of Tokyo (Tokyo, Japan), and Kyoto University (Kyoto, Japan). "Inner shell" refers to the fact that the laser transition occurs in an inner electron shell of the lasing material, leading to the very high-energy photons. The 1.5 Å wavelength is almost 10 times shorter than that of previously reported atomic lasers. As a result, the new laser can potentially be used to view single molecules.

The atomic laser, which is pumped by a free-electron laser at RIKEN of longer wavelength and far lower beam quality than the atomic laser, is based on copper atoms. The researchers exposed copper foil to two x-ray pulses with intensities of about 1019 W/cm2; one pulse was tuned to the copper K-absorption edge as a pump source and the other tuned as a seed for the main laser beam. The team found that using the pumped copper medium in combination with seeding greatly enhanced the coherence and energy-extraction efficiency of the short-wavelength beam. The team hopes to commercialize the laser, along with associated instrumentation, as a high-coherence, ultrahigh-resolution x-ray imaging system. Reference: H. Yoneda et al., Nature,524 (2015); doi:10.1038/nature14894.

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

Request a quote: Micro 3D Printed Part or microArch micro-precision 3D printers

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a Micro 3D Printed Benchmark Part: Send us your file.

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.

How to Tune Servo Systems: The Basics

April 10, 2024
Learn how to tune a servo system using frequency-based tools to meet system specifications by watching our webinar!

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!