UV optical antenna enables short-range nonline-of-sight broadband access

June 4, 2014
A group at the Beijing Institute of Technology has designed an omnidirectional “optical antenna” consisting of a wide-angle reflective radially symmetric dual-mirror setup and a small field lens, all pointed upward so that rays are collected from almost horizontal to almost vertical and directed downward to a 22-mm-diameter UV detector.
1406lfwnewsbreakf3web
1406lfwnewsbreakf3web
1406lfwnewsbreakf3web
1406lfwnewsbreakf3web
1406lfwnewsbreakf3web

For some purposes, free-space optical communication in the deep-UV range is desirable. For example, because Rayleigh scattering is high in the UV, nonline-of-sight communication for short-range broadband access could be possible. In addition, the high absorption by the atmosphere in the solar-blind band means that distant observers would see none of the signal. In response, a group at the Beijing Institute of Technology (China) has designed an omnidirectional “optical antenna” consisting of a wide-angle reflective radially symmetric dual-mirror setup (mirrors axially separated by 100 mm) and a small field lens (not shown in figure), all pointed upward so that rays are collected from almost horizontal to almost vertical and directed downward to a 22-mm-diameter UV detector. One of the design constraints was that the incidence angles on a UV interference filter in front of the sensor fall within the filter’s operating angle.

In addition to the interference filter, the two mirrors were coated with surfaces that reflected mainly in the UV band of interest. A light-blocking diaphragm (also not shown), along with the field lens, help to reduce stray light. The light sensor was a photomultiplier tube (PMT). The entire package, which is enclosed in an 85% transmitting quartz cover to protect the optics, is 18 cm in diameter and 25 cm high. Outdoor experiments showed that the signal-to-noise ratio (SNR) of the optical-antenna/PMT combination was 31 dB higher than the SNR of the PMT used by itself. Contact Yi Tang at [email protected].

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

How Precision Motion Systems are Shaping the Future of Semiconductor Manufacturing

March 28, 2024
This article highlights the pivotal role precision motion systems play in supporting the latest semiconductor manufacturing trends.

Understanding 3D Printing Tolerances: A Guide to Achieving Precision in Additive Manufacturing

March 28, 2024
In the world of additive manufacturing, precision is paramount. One crucial aspect of ensuring precision in 3D printing is understanding tolerances. In this article, we’ll explore...

Automation Technologies to Scale PIC Testing from Lab to Fab

March 28, 2024
This webinar will cover the basics of precision motion systems for PIC testing and discuss the ways motion solutions can be specifically designed to address the production-scale...

Case Study: Medical Tube Laser Processing

March 28, 2024
To enhance their cardiovascular stent’s precision, optimize throughput and elevate part quality, a renowned manufacturer of medical products embarked on a mission to fabricate...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!