Periodically oriented GaN shows feasibility for mid-IR nonlinear optics

Oct. 9, 2012
Researchers at the US Naval Research Laboratory are creating useful mid-IR nonlinear optical devices by alternating the actual crystal orientation of the semiconducting nonlinear material to create potentially useful structures from gallium nitride (GaN) grown by hydride vapor phase epitaxy (HVPE).

The performance of periodically poled lithium niobate (PPLN), along with that of other nonlinear optical materials such as periodically poled potassium titanyl phosphate (PPKTP) that rely on alternating the orientation of ferroelectric domains to maintain quasi-phase matching (QPM), drops off in the midinfrared (IR) beyond 4 μm due to multiphonon absorption. Researchers at the US Naval Research Laboratory (Washington, DC) are creating useful mid-IR nonlinear optical devices by taking another approach—alternating the actual crystal orientation of the semiconducting nonlinear material—to create potentially useful structures from gallium nitride (GaN) grown by hydride vapor phase epitaxy (HVPE).

Gallium nitride has a transparency window of 0.36 to 7 μm, a very high thermal conductivity of 220 W/m°C that eases heat removal, a second-order nonlinear susceptibility with similar magnitude to that of PPLN, and—when grown by HVPE—low dislocation densities on the order of 106 to 107 cm-2. The researchers grow a layer of aluminum nitride in stripes on an N-polar GaN substrate, then simultaneously grow GaN in polarities that alternate between the stripe and stripe-free regions. Thicknesses of up to about 80 μm have been grown this way; the aim is to grow even thicker structures for practical use, as well as to further improve material quality. Contact Jennifer Hite at [email protected].

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

Request a quote: Micro 3D Printed Part or microArch micro-precision 3D printers

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a Micro 3D Printed Benchmark Part: Send us your file.

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.

How to Tune Servo Systems: The Basics

April 10, 2024
Learn how to tune a servo system using frequency-based tools to meet system specifications by watching our webinar!

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!