Holmium-doped glass ceramics enhance silicon solar-cell efficiency

Feb. 1, 2009
Solar cells fabricated from silicon can benefit from a photon upconversion (UC) process in which two or more low-energy photons are converted to a higher-energy photon.

Solar cells fabricated from silicon can benefit from a photon upconversion (UC) process in which two or more low-energy photons are converted to a higher-energy photon. Because silicon has a 1.1 eV energy gap centered at 1100 nm, electron-hole pairs are created only when photons with wavelengths shorter than this value (or with energy higher than this value) are absorbed by the solar cell. By adding a UC material at the rear of a bifacial silicon solar cell that absorbs photons with wavelengths longer than 1100 nm and converts them to higher-energy photons, efficiencies of silicon solar cells can be improved.

Recognizing that even the most efficient erbium-doped materials used in UC experiments to date are not efficient enough for practical application, a researcher from the University of La Laguna (Tenerife, Spain) has successfully developed a holmium (Ho3+)-doped transparent nanostructured oxyfluoride glass-ceramic material that achieves a UC efficiency two orders of magnitude better than its precursor glass. Two- and three-photon absorption processes produce two emission bands in this UC material centered at 650 and 910 nm under infrared excitation at 1170 nm, where solar irradiation is about a factor of two more intense than in the 1550 nm absorption range of erbium-doped phosphors. This material could be used alone or in combination with existing erbium-doped materials to create higher-efficiency silicon solar cells. Contact Fernando Lahoz at [email protected].

Sponsored Recommendations

Understanding 3D Printing Tolerances: A Guide to Achieving Precision in Additive Manufacturing

March 28, 2024
In the world of additive manufacturing, precision is paramount. One crucial aspect of ensuring precision in 3D printing is understanding tolerances. In this article, we’ll explore...

Horizon Microtechnologies: Coating 3D Printed Parts with Functional Materials

March 28, 2024
Andreas Frölich from Horizon Microtechnologies talks innovations in 3D micro-parts printing with functional materials for various industries.

Melles Griot® XPLAN™ CCG Lens Series

March 19, 2024
IDEX Health & Science sets a new standard with our Melles Griot® XPLAN™ CCG Lens Series fluorescence microscope imaging systems. Access superior-quality optics with off-the-shelf...

Spatial Biology

March 19, 2024
Spatial Biology refers to the field that integrates spatial information into biological research, allowing for the study of biological systems in their native spatial context....

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!