NEWLED aims to develop warm-white LEDs emitting at higher than 200 lm/W

March 18, 2013
Dundee, Scotland--The University of Dundee is leading a 11.8 million Euro project, called NEWLED, that aims to develop a new generation of white LEDs with an overall luminous efficacy of at least 200 lm/W, twice that of today's LEDs.

Dundee, Scotland--The University of Dundee is leading a 11.8 million Euro project, called NEWLED, that aims to develop a new generation of white LEDs with an overall luminous efficacy of at least 200 lm/W, twice that of today's LEDs.

"Common lightbulbs have a pretty low efficiency rating and even the best current white LEDs in use only have an overall efficiency of around 25%," says professor Edik Rafailov, NEWLED project leader. "What we are aiming to develop is a significantly more efficient white LED, which would be around 50% to 60% efficient. If we can do that and it becomes widely adopted, then the effects on energy consumption would be enormous. It would also produce lighting over which much more control could be exercised in brightness and tone."

NEWLED hopes to develop phosphor-free structures to replace the blue-LED-plus-yellow-phosphor type of white-light emitter that makes up the vast majority of white LEDs being sold today. One way NEWLED will approach this is to boost the efficiency of yellow indium gallium aluminum phosphide/aluminum gallium arsenide (InGaAlP/AlGaAs) LEDs by bandgap-engineered superlattices, combining the yellow LEDs with gallium nitride (GaN)-based blue LEDs. The project will also work on better light-extraction methods for LEDs.

Related: HgTe-HgCdTe superlattice photodetector has high response in LWIR

Related: Coating that mimics firefly scales makes LEDs more efficient

Related: Photonic-crystal LED reaches 73% light-extraction efficiency

Related: Rensselaer researchers increase green LED output with nanoscale pattern

The project started in November, 2012 and will end by November, 2016. Forecast project cost and project funding are 11,760,277 and 8,400,000 Euros, respectively.

The other participants in NEWLED are:

--University of Rome Tor Vergata (Rome, Italy)
--Technische Universität Berlin (Berlin, Germany)
--TopGaN (Warsaw, Poland)
--Centre National de la Recherche Scientifique (Paris, France)
--M-Squared Lasers (Glasgow, Scotland)
--Osram Opto Semiconductors (Regensburg, Germany)
--VI Systems (Berlin, Germany)
--Compound Semiconductor Technologies (Glasgow, Scotland)
--Vilnius University (Vilnius, Lithuania)
--Ioffe Physical-Technical Institute of the Russian Academy of Sciences (St. Petersburg, Russia)
--Soft-Impact (St. Petersburg, Russia)
--LUX-TSI (Pencoed, Wales)
--TTY-Säätiö (Tampere, Finland)

Sources:

http://cordis.europa.eu/search/index.cfm?fuseaction=proj.document&PJ_RCN=13100600

http://www.dundee.ac.uk/pressreleases/2013/february13/newled.htm

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

How Precision Motion Systems are Shaping the Future of Semiconductor Manufacturing

March 28, 2024
This article highlights the pivotal role precision motion systems play in supporting the latest semiconductor manufacturing trends.

Understanding 3D Printing Tolerances: A Guide to Achieving Precision in Additive Manufacturing

March 28, 2024
In the world of additive manufacturing, precision is paramount. One crucial aspect of ensuring precision in 3D printing is understanding tolerances. In this article, we’ll explore...

Automation Technologies to Scale PIC Testing from Lab to Fab

March 28, 2024
This webinar will cover the basics of precision motion systems for PIC testing and discuss the ways motion solutions can be specifically designed to address the production-scale...

Case Study: Medical Tube Laser Processing

March 28, 2024
To enhance their cardiovascular stent’s precision, optimize throughput and elevate part quality, a renowned manufacturer of medical products embarked on a mission to fabricate...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!