The WaferSense airborne particle sensor identifies particle sources in wafer-processing equipment for semiconductors. A fan pulls air or gas through a channel, and particles scatter laser light onto a photodiode. Compatible with frontends, coater/developer tracks, and deposition and etch equipment, the device can detect particles as small as 0.1 μm.
CyberOptics Semiconductors
Wilsonville, OR
www.cyberopticssemi.com
-----
PRESS RELEASE
WaferSense® Airborne Particle Sensor
For Real-Time Semiconductor Equipment Diagnostics
Wafer-like airborne particle counter validates & analyze real-time wafer contamination
Wilsonville, Oregon, February 9, 2011 – After a year of beta testing and product analysis, CyberOptics Semiconductor, Inc. has released the WaferSense® Airborne Particle Sensor (APS) for wafer processing equipment to the semiconductor market. The only semiconductor sensor of its kind to identify particle sources in tool, the Airborne Particle Sensor moves through semiconductor process equipment and automation material handing systems to monitor airborne particles, reporting information in real-time to allow engineers to efficiently validate wafer contamination. With a wafer-like shape compatible with existing automation and wireless communication providing real-time data, the Airborne Particle Sensor speeds tool qualification and release to production. APS reduces time locating particle sources.
With real-time views of particle conditions, process engineers can address specific trouble spots and be better prepared to pass particle qualifications on the very first attempt. The metrology device can also be used to establish a baseline and to ensure operations continue on this baseline as part of preventive maintenance.
“In the past, it could take engineers hours to determine where a particle event is occurring or if a particlerelated PM or qualification was done correctly to release tools for manufacturing,” stated Craig Ramsey, Ph.D, CyberOptics Semiconductor General Manager. “The Airborne Particle Sensor represents a significant change in particle-detection methodology, enabling engineers to really monitor and control contaminations in their tools and protect die yield – with real-time views of particle conditions to address areas of concern instead of the whole tool.”
How it Works
The Airborne Particle Sensor uses a fan to pull non-corrosive gas or air through a channel as a laser illuminates the air/gas stream while particles scatter light onto the sensors photodiode. Compatible with front-ends, coater/developer tracks, deposition and etch equipment, the APS has the ability to detect particles as small as 0.1 um. The automation-friendly semiconductor sensor doesn't require engineers to open chambers or expose ultra-clean process areas to the environment. The sensor can detect particles in real-time without opening the tool.
Using the Airborne Particle Sensor’s companion software, ParticleView™ and ParticleReview™, fab engineers can collect and display particle data wirelessly to see the effect of adjustments in real time, speeding equipment qualification and setup. Particle data can be recorded to compare past to present operations as well as one tool to another to conduct machine-to-machine trend analysis of particle conditions and to establish process control and conduct process improvement.
The Airborne Particle Sensor is available in 200 mm, 300 mm (and 450mm special order) wafer-like form factors. For more information on the Airborne Particle Sensor, please refer to our web site at http://www.cyberopticssemi.com/products/wafersense/aps/ or contact sales at (503) 495-2200.
About CyberOptics Semiconductor, Inc.
CyberOptics Semiconductor develops wireless products that seamlessly measure critical parameters in semiconductor fabrication processes and equipment. The company’s pioneering WaferSense® line includes wireless metrology devices for vibration, leveling, gapping, robot teaching and sensing airborne particles in semiconductor process equipment. The company is the largest producer of reflective wafermapping sensors and a leading provider of frame grabber machine vision boards under its HAMA Sensors™ and Imagenation™ brands. CyberOptics Semiconductor is a subsidiary of CyberOptics Corp. (Nasdaq:CYBE), one of the world's leading providers of process yield and throughput improvement solutions for the electronic assembly and semiconductor fabrication industries. For information, visit http://www.cyberopticssemi.com/, e-mail [email protected] or call 800-366-9131.
-----
Posted by Lee Mather
Follow OptoIQ on your iPhone; download the free app here.
Subscribe now to Laser Focus World magazine; it's free!