60 years ago, pioneer NIST computer was capable of lens design

June 24, 2010
Sixty years ago this week, NBS (now NIST) informed the nation about the dedication of the first programmable computer in U.S. history, the Standards Electronic Automatic Computer (SEAC).

Boulder, CO--Sixty years ago this week, the National Bureau of Standards (NBS, now the National Institute of Standards and Technology, or NIST) informed the nation about the dedication of the first programmable computer in U.S. history, the Standards Electronic Automatic Computer (SEAC). Its duties included lens design, optical image processing, and digital image scanning, as well as many non-photonics-related functions.

Acoustic-delay storage
The revolutionary device moved information as sound wave pulses traveling through 64 mercury-filled glass tubes, using an early data-storage technique known as acoustic delay. Each tube had a quartz crystal at both ends, one serving as a transmitter and the other as a receiver. Sound pulses were sent and received repeatedly in a closed loop, recirculating the data patterns they carried and essentially, storing them. It was the electronic equivalent of repeating a telephone number to oneself from the time it is found in the directory until it is dialed.

SEAC had the equivalent of 6,000 bytes of storage. According to Measures for Progress: A History of the National Bureau of Standards by R.C. Cochrane, SEAC "could add or subtract pairs of 11-digit numbers 1,000 times a second, or multiply and divide them 330 times a second." The book also states that "failure of one of its [SEAC's] more than 100,000 connections and components, even for a millionth of a second, would result in a computer malfunction. Yet, often operating nonstop seven days a week, SEAC performed for 4,000 hours in the first nine months without a malfunction." Among the computer's many tasks: computations for the military and the Atomic Energy Commission; calculations on electronic circuit design and for optical lenses; statistical sorting and tabulating for Social Security and the Census Bureau; and processing of data from studies of crystal structure.

First scanned image
Perhaps one of SEAC's most memorable applications occurred in 1957 when NBS researcher Russell Kirsch and colleagues created a rotating drum scanner and the programming that allowed images to be fed into the computer. The first image ever scanned was a grainy, black-and-white shot of Kirsch's three-month-old son, Walden, a picture honored by Life magazine in 2003 as one of "the 100 photographs that changed the world."

SEAC served its customers faithfully until 1964 when it was replaced by more advanced computers. In 14 years of active duty, it handled problems and computations in areas such as meteorology, linear programming, optics, navigation, statistics, physics, accounting and manufacturing.

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

Request a quote: Micro 3D Printed Part or microArch micro-precision 3D printers

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a Micro 3D Printed Benchmark Part: Send us your file.

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.

How to Tune Servo Systems: The Basics

April 10, 2024
Learn how to tune a servo system using frequency-based tools to meet system specifications by watching our webinar!

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!