Infinera sends data over record 4,000 km optical subsea network

March 24, 2009
March 24, 2009--Infinera (Sunnyvale, CA) successfully concluded a demonstration in which its photonic integrated circuit (PIC)-based optical communications network architecture (called DTN) transmitted data over a 4,000 km third-party subsea network. Using a 25 GHz channel spacing (compared to 50 GHz on pre-existing equipment, the Infinera system doubled the bandwidth capacity of the sub-sea network.

March 24, 2009--Infinera (Sunnyvale, CA) successfully concluded a demonstration in which its photonic integrated circuit (PIC)-based optical communications network architecture (called DTN) transmitted data over a 4,000 km third-party subsea network. Using a 25 GHz channel spacing (compared to 50 GHz on pre-existing equipment, the Infinera system doubled the bandwidth capacity of the sub-sea network.

This demonstration and other attributes of Infinera's DTN system will be discussed today by Infinera Fellow Steve Grubb at the OFC/NFOEC conference in San Diego in a Market Watch session entitled "More Wavelengths, Higher Bit Rates, More Spectrum … The Path to Harnessing Maximum Fiber Capacity at the Lowest Cost."

"The ability of the Infinera DTN to transmit data undersea for 4,000 kilometers, and over a foreign amplifier chain is a pathbreaking demonstration, which holds out the opportunity of a new, innovative, and cost-effective way to increase capacity on subsea networks," said Grubb. Submarine optical networks include chains of subsea optical amplifiers, designed for the demands of operation on the ocean floor, and submarine line terminating equipment (SLTE) located in terrestrial landing stations and connected to either end of the amplifier chain. In this demonstration, Infinera DTNs replaced the pre-existing SLTE systems and transmitted dense wavelength-division multiplexing (DWDM) optical signals across the pre-existing subsea amplifier chain.

For more information, go to www.infinera.com.

--Posted by Gail Overton, [email protected]; www.laserfocusworld.com.

A complete review of the OFC/NFOEC conference will appear in the April 1 issue of Optoelectronics Report. Please subscribe to Optoelectronics Report at www.optoelectronicsreport.com, the twice-monthly eNewsletter from the editors at Laser Focus World and BioOptics World that covers both national and international business news and market trends and tracks technology advances to interpret their business implications.

Sponsored Recommendations

Request a quote: Micro 3D Printed Part or microArch micro-precision 3D printers

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a Micro 3D Printed Benchmark Part: Send us your file.

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.

How to Tune Servo Systems: The Basics

April 10, 2024
Learn how to tune a servo system using frequency-based tools to meet system specifications by watching our webinar!

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!